{
    "lazyNodes": false,
    "abFitnotesFlag": false,
    "abCrawlReviews": false,
    "productOptionsCookie": false,
    "orderDelayFlag": false,
    "skipSessionCookie": false,
    "covidMessage": false,
    "fullTitleCookie": false,
    "nrLoggerCookie": false,
    "checkoutReviewCookie": false,
    "productOptionSeqCookie": false,
    "maintenanceFlag": false,
    "bufferETACookie": false,
    "multiShippingDiscountFlag": false,
    "newFitmentFlag": false,
    "surveyOptInFlag": false,
    "crossSellFlag": false,
    "skuMappingFlag": false,
    "paySplitCookie": false,
    "callDisableFlag": false,
    "zipPaymentFlag": "u",
    "hassleFreeReturn": false,
    "lifetimeReplacement": false,
    "cpn_off": false
}
1988 Dodge B250

1988 Dodge B250 Spider Gear Kits

Refine by:

Shop Catalog

Showing 1 - 15 of 15 results
Sort by:
Yukon standard open spider gear kit for 9.25" Chrysler with 31 spline axles
Part Number: YUKYPKC925S31
Guaranteed to Fit
$317.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Chrysler 9.25 in.
Product Details
Location : Rear AxleNotes : This Kit Contains Two Each of the Following Thickness Thrust Washers - 0.37 in. and 0.43 in.; Not Compatible with 2007 and Up 9.25 in. Front DifferentialsAxle Type : Chrysler 9.25 in.Spline Count : 31Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

USA Standard Gear open spider gear set for Chrysler 9.25", 31 spline
Part Number: YSTZIKC925S31
Guaranteed to Fit
$140.99
Vehicle Fitment
  • 1988 Dodge B250 All Submodels All Engines
Product Details
Location : Rear AxleNotes : Rear with Open DifferentialAxle Type : Chrysler 9.25 in.Spline Count : 31Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year USA Standard Gear limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

USA Standard Gear open spider gear set for Chrysler 8.25", 27 spline
Part Number: YSTZIKC825S27
Guaranteed to Fit
$125.49
Vehicle Fitment
  • 1988 Dodge B250 All Submodels All Engines
Product Details
Location : Rear AxleNotes : 27 Spline Open DifferentialAxle Type : Chrysler 8.25 in.Spline Count : 27Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year USA Standard Gear limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Dana 44 And Chrysler 9.25" Traclloc Clutch Kit replacement
Part Number: YUKYPKD44PCTL
Guaranteed to Fit
$129.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Dana 44 & Chrysler 9.25 in.
Product Details
Location : Front AxleNotes : Trac Loc PositractionAxle Type : Dana Spicer 44 and Chrysler 9.25 in.Spline Count : 30Recommended Use : PerformanceWarranty : 1-year Yukon Gear and Axle Limited WarrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

USA Standard Gear replacement spider gear set for Dana 60, 35 spline
Part Number: YSTZIKD60S35
Guaranteed to Fit
$132.49
Vehicle Fitment
  • 1988 Dodge B250 All Submodels All Engines Dana 60
Product Details
Location : Rear AxleNotes : 35 Spline Open DifferentialAxle Type : Dana Spicer 60,Spline Count : 35Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Roll Pin and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year USA Standard Gear limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

USA Standard Gear replacement spider gear set for Dana 60, 30 spline
Part Number: YSTZIKD60S30
Guaranteed to Fit
$132.49
Vehicle Fitment
  • 1988 Dodge B250 All Submodels All Engines Dana 60
Product Details
Location : Rear AxleNotes : 30 Spline Open DifferentialAxle Type : Dana Spicer 60,Spline Count : 30Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Roll Pin and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year USA Standard Gear limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).
Part Number: YUKYPKD60PCPL
Guaranteed to Fit
$172.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Dana 60 And Fiber
Product Details
Location : RearNotes : Powr Lok PositractionAxle Type : Dana Spicer 60, 70, 70U and 70HDSpline Count : 16Recommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Yukon replacement standard open spider gear kit for Dana 60 with 30 spline axles
Part Number: YUKYPKD60S30
Guaranteed to Fit
$213.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Dana 60
Product Details
Location : Rear AxleNotes : Open Differential with 30 Spline AxlesAxle Type : Dana Spicer 60Spline Count : 30Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Roll Pin and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Dana 60 & Dana 61 TracLoc clutch set.
Part Number: YUKYPKD60PCTL
Guaranteed to Fit
$264.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Dana 60, Rear
Product Details
Location : RearNotes : Trac Loc PositractionAxle Type : Dana Spicer 60Spline Count : 16Recommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Yukon standard open spider gear kit, Dana 60 and 61 w/35 spline axles
Part Number: YUKYPKD60S35
Guaranteed to Fit
$279.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Dana 60
Product Details
Location : Rear AxleNotes : Open Differential with 35 Spline AxlesAxle Type : Dana Spicer 60Spline Count : 35Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Roll Pin and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Yukon standard open spider gear kit for '96 and older 8.25" Chrysler, 27 spline
Part Number: YUKYPKC825S27
Guaranteed to Fit
$292.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Chrysler 8.25 in.
Product Details
Location : Rear AxleNotes : Open Differential with 27 Spline AxlesAxle Type : Chrysler 8.25 in.Spline Count : 27Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Yukon positraction spiders for Chrysler 9.25" Dura Grip, 31 spline, no clutches
Part Number: YUKYPKC925P31
Guaranteed to Fit
$382.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Chrysler 9.25 in.
Product Details
Location : Rear AxleAxle Type : Chrysler 9.25 in.Spline Count : 31Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Yukon replacement posi internals, Dana 60 (full and semi float), 35 spline
Part Number: YUKYPKD60TL35
Guaranteed to Fit
$642.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Dana 60
Product Details
Location : Front AxleNotes : Trac Loc Positraction with 35 Spline AxlesAxle Type : Dana Spicer 60Spline Count : 35Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Roll Pin and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles
Part Number: YUKYPKD60PL35
Guaranteed to Fit
$799.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Dana 60
Product Details
Location : Rear AxleNotes : Powr Lok Positraction with 35 Spline AxlesAxle Type : Dana Spicer 60Spline Count : 35Includes : Two Side Gears, Four Pinion Gears, Cross Pin Shafts and Side Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Yukon replacement positraction internals, Dana 60/61 (full-floating), 30 spline
Part Number: YUKYPKD60TL30
Guaranteed to Fit
$891.89
Vehicle Fitment
  • 1988 Dodge B250 Base All Engines RWD, Dana 60
Product Details
Location : Rear AxleNotes : Trac Loc Positraction with 30 Spline AxlesAxle Type : Dana Spicer 60Spline Count : 30Includes : Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Roll Pin and Spider Gear Thrust WashersRecommended Use : PerformanceWarranty : 1 year Yukon Gear & Axle limited warrantyQuantity Sold : KitProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Page 1 of 1 | Showing 1 - 15 of 15 results

Popular Products

Helpful Automotive Resources

How Does Rear-Wheel Drive Work?
How Does Rear-Wheel Drive Work?Rear-wheel drive powertrains have several different arrangements. The most prevalent type has the engine mounted longitudinally in the vehicle’s front end along with the transmission and a spinning driveshaft carrying power to the rear axle that propels the vehicle.
Your Guide to How Spider Gears Work, Plus FAQs
Your Guide to How Spider Gears Work, Plus FAQsInside the differential case, there are two side gears and two pinion gears. The pinion gears are technically the spider gears, but many people simply refer to all four of the gears as spider gears. A spider gear is an example of a bevel gear that rotates around the differential case.