{
"lazyNodes": false,
"abFitnotesFlag": false,
"abCrawlReviews": false,
"productOptionsCookie": false,
"orderDelayFlag": false,
"skipSessionCookie": false,
"covidMessage": false,
"fullTitleCookie": false,
"nrLoggerCookie": false,
"checkoutReviewCookie": false,
"productOptionSeqCookie": false,
"maintenanceFlag": false,
"bufferETACookie": false,
"multiShippingDiscountFlag": false,
"newFitmentFlag": false,
"surveyOptInFlag": false,
"crossSellFlag": false,
"skuMappingFlag": false,
"paySplitCookie": false,
"callDisableFlag": false,
"zipPaymentFlag": "u",
"hassleFreeReturn": false,
"lifetimeReplacement": false,
"cpn_off": false
}Fertan® Rust Neutralizer Fertan Rust Converter (250 ml Spray Bottle) - Replaces OE Number 22220
Highlights
WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Information
FERTAN RUST CONVERTER
Fertan Rust Converter is the best way to remove rust from any metal surface. It's simple to use - just apply it to the rusted area and it will instantly turn it into a blackened metal that's ready for painting. It also leaves a protective zinc coating that prevents rust from coming back for up to 6 months.
RECOMMENDED FOR: Long-term, protective rust treatment for maintenance interventions on previously painted, oxidized metal parts.
- Converts rust into a paintable surface
- Residue from use is neither acidic or a film of converted rust
- Eliminates rust from steel and iron surfaces
- Complex, patented tannic acid is a water-based active ingredient
Application:
- If possible, sand the loose surface rust with sandpaper or by grinding.
- Get rid of oil, grease, silicone and dirt. Use silicone remover if necessary.
- Apply FERTAN Rust Converter with a brush, roller or spray gun and let it react at room temperature (20-degree C / 68-degree F) for at least 24 hours. For temperatures between (5-degree C – 19-degree C / 41-degree F - 66-degree F) let the product react for 48 hours. A black or even blue-violet surface is formed thereafter.
- When application is performed in direct sunlight or hot conditions damp the surface after 1-2 hours.
- Do not use the product below 5-degree C / 41-degree F or frost!
- Thereafter thoroughly rinse surface with water to remove the dust.
- Do not adapt the surface mechanically.
- Apply coating or paint on the surface within 6 months of the application.
- After treatment / lacquering can be done with near all commercial products.
- Filler, Primer (Epoxy Primer, Multi Metal Coating etc.)
- Protective waxes (Underbody - cavity protection Wax, Rust Inhibitor etc.)
- Stonechip Protection / EP resins
Since 1979, FERTAN delivers the same high-quality German designed solutions that help prevent, reduce, or eliminate corrosion in corrosion-related projects like classic car, motorcycle, home renovation, body shop, and large-scale industry including marine, freight, agriculture, and more.