{
    "lazyNodes": false,
    "abFitnotesFlag": false,
    "abCrawlReviews": true,
    "productOptionsCookie": false,
    "orderDelayFlag": false,
    "skipSessionCookie": false,
    "covidMessage": false,
    "fullTitleCookie": false,
    "nrLoggerCookie": true,
    "checkoutReviewCookie": false,
    "productOptionSeqCookie": false,
    "maintenanceFlag": false,
    "bufferETACookie": false,
    "multiShippingDiscountFlag": false,
    "newFitmentFlag": false,
    "surveyOptInFlag": true,
    "crossSellFlag": false,
    "skuMappingFlag": false,
    "paySplitCookie": false,
    "callDisableFlag": true,
    "zipPaymentFlag": "c",
    "hassleFreeReturn": true,
    "lifetimeReplacement": true,
    "cpn_off": false
}
1996 GMC C2500

1996 GMC C2500 Rear Main Seals

Refine by:

Shop Catalog

Showing 1 - 3 of 3 results
Sort by:
Rear Rear Main Seal - Rear
Part Number: RC31220004
Guaranteed to Fit
$12.49
Vehicle Fitment
  • 1996 GMC C2500 Sierra SL 8 Cyl 5.7L GAS, One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SLT 8 Cyl 5.7L GAS, One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SLE 8 Cyl 5.0L One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SLE 8 Cyl 5.7L GAS, One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SLT 8 Cyl 5.0L One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SL 8 Cyl 5.0L One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
Product Details
Location : RearWarranty : 1-year Replacement unlimited-mileage warrantyQuantity Sold : SetReplaces OE Number : ABS320, 17293, JV1620, JV1656, 191006701Prop 65 Warning :

Warning SymbolWARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Interchange Part Number : BS40656, ABS320, 17293, JV1620, JV1656, 191006701Product Fit : Direct FitReturns Policy : 30-Day Return Policy
Rear Main Seal - Sold individually
Part Number: AC12555771
Guaranteed to Fit
$9.99
Vehicle Fitment
  • 1996 GMC C2500 Sierra SL 8 Cyl 5.7L
  • 1996 GMC C2500 Sierra SLE 8 Cyl 5.0L
  • 1996 GMC C2500 Sierra SLE 8 Cyl 5.7L
  • 1996 GMC C2500 Sierra SL 8 Cyl 5.0L
  • 1996 GMC C2500 Sierra SLT 8 Cyl 5.7L
  • 1996 GMC C2500 Sierra SLT 8 Cyl 5.0L
Product Details
Location : RearWarranty : 24-months or unlimited mile AC Delco limited warrantyQuantity Sold : Sold individuallyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Series : GM Original Equipment Series
Rear Main Seal - Rubber, Direct Fit, Sold individually
Part Number: FPBS40656
Guaranteed to Fit
$25.99
Vehicle Fitment
  • 1996 GMC C2500 Sierra SL 8 Cyl 5.7L GAS, One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SLT 8 Cyl 5.7L GAS, One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SLE 8 Cyl 5.0L One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SLE 8 Cyl 5.7L GAS, One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SLT 8 Cyl 5.0L One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
  • 1996 GMC C2500 Sierra SL 8 Cyl 5.0L One-Piece, Rear Main Seal Set, Improved Design, Ptfe Rubber
Product Details
Location : RearQuantity Sold : Sold individuallyReplaces OE Number : ABS320, 17293, JV1620, JV1656, 191006701Prop 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Interchange Part Number : RC31220004, ABS320, 17293, JV1620, JV1656, 191006701Material : RubberProduct Fit : Direct Fit
Page 1 of 1 | Showing 1 - 3 of 3 results

Popular Products

Product Questions & Answers

Q:Hi Mia. This is John.      I’d like some advice about installing a BS40656 Rear Main SealIn my 1999 GMC Yukon with a 5.7 L engine. I have the engine out of the vehicle, the oil pan is off, and the seal carrier is removed from the back of the engine. I have remove remove the old seals from the seal carrier and cleaned up the seal carrier in the back of the block where the paper gasket will go between the seal carrier and the block. Should I use any our TV on the paper gasket between the seal carrier and the block?  Or is it OK to install that paper gasket dry?        My main question is, do I install the carrier to the block first and then install my rear main seal into the carrier over the crank, or do I install the seal into the carrier and then slide the seal and the carrier onto the crank and then bolt The carrier which contains the seal  to the engine. Also one more thing. I know I am not supposed to lubricate the crank or the seal touches it or the seal itself where it touches the crank, but would it be OK to put some say oriole on the outside perimeter of the seal itself to allow it to slip into the carrier more easily or as designed it will it slip into the carrier easy enough? I have a 4 inch piece of PVC pipe that seems to fit the seal rather nicely and I’m going to use that to tap the seal into the carrier whether it is mounted to the block already or before I mount it to the block. Some accurate advice would be so relieving to receive. I have a day or two before this step is necessary to be performed so if you need to take your time to research this or make some calls to feel free to do so.          Within the Fel-Pro gasket set I purchased there isn’t any advice in regard to any of the above questions. Hours of searching the internet left me dizzy. Looking forward to hearing back from you   Thanks ahead of time Mia for your help.                        John B. Show Less
John B.
A:BEST ANSWERHello! You do not need to use RTV on the whole carrier gasket, but I like to use Permatex 80062 High Tack Gasket Sealant on bottom corners where it meets the oil pan. I put the same Permatex on the perimeter of the main seal before pressing on the carrier. I then install the assembly to the block. Show less
Mitchell D.
 
1 Question, 1 AnswerView all Q&As >
Q:Which side of the seal should be installed facing the engine?
Jas K.
A:BEST ANSWERHi Jas, I'm glad to assist you. It would be the one with the gray surface. I hope this helps, and we thank you for inquiring. Show less
Arnel E.
 
2 Questions, 1 AnswerView all Q&As >