{
"lazyNodes": false,
"abFitnotesFlag": false,
"abCrawlReviews": false,
"productOptionsCookie": false,
"orderDelayFlag": false,
"skipSessionCookie": false,
"covidMessage": false,
"fullTitleCookie": false,
"nrLoggerCookie": false,
"checkoutReviewCookie": false,
"productOptionSeqCookie": false,
"maintenanceFlag": false,
"bufferETACookie": false,
"multiShippingDiscountFlag": false,
"newFitmentFlag": false,
"surveyOptInFlag": false,
"crossSellFlag": false,
"skuMappingFlag": false,
"paySplitCookie": false,
"callDisableFlag": false,
"zipPaymentFlag": "u",
"hassleFreeReturn": false,
"lifetimeReplacement": false,
"cpn_off": false
}Acura RL Hoods
Shop Catalog
WARNING: This product can expose you to chemicals including Di-isodecyl phthalate, Diisononyl phthalate, Lead and lead compounds, Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Customer Guides
Culprits of a Faulty Acura RL Hood
The Acura RL hood must always be in good condition. Not only is it one of the most exposed parts of the vehicle, but it also keeps the under-the-hood components protected. There can be a lot of problems that the hood experiences, but no one said that they can't be solved. Here are some troubleshooting tips to help you diagnose a faulty Acura RL hood.
Stuck hood
A jammed hood is a common problem that almost every driver experiences. Rusting and aging of the hood lock are two factors why this issue happens. If you can't get it up, you can ask a buddy to help. You'll have to let go of the lever to lift the hood while your friend is trying to pry it open. If this doesn't solve the issue, push the hood down and open it manually. Remember to be careful because you wouldn't want to damage it even more.
Damaged cable
If your hood won't budge, then another reason could be because of a damaged cable. This issue is common especially when the cable is worn out and hasn't been replaced for a really long time. However, repairing this is a little complicated and you can't afford to do some trial-and-error tasks because you might end up jeopardizing the hood. The best thing to do is to visit an expert mechanic to help you do the trick. But, if you've had more experiences on doing DIY repair jobs, then you can try to fix it by looking for the broken cable. Replace it right away so you won't experience further hassles when opening the Acura RL hood.
Damaged lever or loose cable connection
The hood can't be the only reason why it won't open. Sometimes, it can be due to a damaged lever. Fortunately, this one's easy to locate because all you have to do is to reach out for it. If the lever's not the problem, but the hood still doesn't go up, it can be because of loose cable connection. You can simply solve this by using pliers. Just remove the panel around the hood release lever and you'll find the cable that's in charge of opening the hood. Pull the cable hard and if the hood pops open, then the cable must have been really loose.
The Acura RL hood is a visible car part, which is why it's important that you take good care of it. Aside from keeping it a great sight to look at, make sure that it's in good condition at all times because it also protects the components that are under the hood. Here are a few maintenance tips that you may find useful in taking good care of your Acura RL hood.
Fix the dent.
Though a tiny dent won't be noticeable, it can still affect the aesthetics of your car. Even if it's just a small imperfection, taking time to repair it probably won't hurt. With just a rubber mallet, you can pound the dented area to restore it back to its original shape. Be careful; you wouldn't want to damage the hood even more.
Restore the faded paint.
It's inevitable for the car hood to become discolored especially since this faces up and gets hit directly by sunlight. If you start noticing paint cracks, then it's time to repaint the hood. Also, if you haven't painted your automobile before, do know that factory paint jobs have thin paint and is more likely to fade after a few years.
Regularly wash the hood.
Since you probably wash your vehicle on a regular basis, you can follow some of these tips. Wash your hood with lukewarm and soapy water. Also, see to it that you use a normal car shampoo and nothing too harsh that might react negatively with the car paint. Your car hood would probably be much cleaner if you take it to the carwash.
Clean dry blood.
This is an uncommon case, but it does happen to some drivers. If a bird suddenly smashes on your hood and leaves its blood as evidence of its death, then you better clean it right away. Sometimes, you wait until you get home to sanitize it, but the blood's all dried up. There's a simple way to do it. All you need is water, mild dish soap, and a non-abrasive sponge and you can certainly clean off the dry blood of the poor little bird that died on your hood.
Helpful Automotive Resources
