Toyota Pickup Fenders

How to Keep your Toyota Pickup Fender in Good Condition

Toyota trucks have evolved in the eyes of the American motoring community throughout the years. Toyota incorporated various design changes to match the growing and changing market. But as time would have it, the design and reliability of the Toyota truck has proved itself under the worst conditions imaginable. And we all know that your truck will not be complete without having the appropriate Toyota Pickup fender attached on its sides. This panel keeps your truck looking good as well as properly housing your wheels as it rolls down the street. Because it is made of metal, the fender is prone to dings, rust, and corrosion. Here are some maintenance tips to keep your fender looking good and fresh.

• Always observe extreme caution whenever you are driving.

Yes, we know. The Toyota pickup is designed to withstand different conditions, terrains, and climates. However, you should still observe extreme caution whenever you are driving. By being a defensive driver, you avoid putting yourself at risk. Careless drivers around you can put dings and scratches on your fender. Even without drivers around, you can damage your fender by driving too close to road hazards. This applies especially when you are out on the trail. The bottom line: choose the roads ahead and drive safely when there are hazards.

• Wash your fender with clean water.

Whenever you use your Toyota pickup truck to work and adventures, the surface of its fender collects layers of dust and particles. You would want to keep this to a manageable level. To do this, regularly wash your fenders with clean water. This eliminates some of the particles and loosens the grime that sticks in the crevices. For very light layers of dirt, the water treatment can do just fine. But for very dirty fenders, water is just the beginning.

• Scrub your fender with a sponge soaked in car shampoo.

After giving your dirty fender a quick rinse using water, you should proceed with scrubbing it gently. Do so using a sponge or wash mitt soaked in car shampoo. Your scrubbing motion combined with the active ingredients of the shampoo should take care of the dirt build-up.

• The Toyota Pickup fender is constructed from sturdy materials and designed to withstand constant abuse from road elements like rock and mud, but that doesn’t mean it’s impervious to damage.
• It’s important to keep your Toyota Pickup fender in good condition because it plays an important role in your truck’s safety and appearance.
• The price of a Toyota Pickup fender replacement ranges from $30 to $100, depending on the brand as well as your truck’s submodel and year. You can buy this component individually, as part of a kit, or in sets of two.
• CarPart.com’s built-in vehicle selector makes it easier for you to narrow down our Toyota Pickup parts catalog to fenders that are compatible with your truck. Simply plug in its year, make, and model to get specific results.

The Toyota Pickup has been known around the world as one of the most reliable and sturdiest workhorses. If you own Toyota Pickup, then one of the body panels that complete the overall look of your truck is the fender.

As with other body panels, the Toyota Pickup fender is constructed from sturdy materials and designed to withstand constant abuse from road elements like rock and mud, but that doesn’t mean they’re impervious to damage. Normal wear and tear as well as accidents can take a toll on this component.

Here are some of the common symptoms that indicate your Toyota Pickup fender needs to be replaced:

Corrosion

Your Toyota Pickup fender is constantly subjected to road salt, mud, water puddles, chemicals, and other outdoor elements that make it more susceptible to corrosion. Rust could eat away the surface of the fender underneath its shiny paint, compromising its efficiency. Keep an eye out for rust spots and replace a severely corroded fender before the rust spreads to other parts of your truck.

Severe physical damage

If you’re recently involved in a major accident and your truck’s fender took most of the hit, then it’s likely that it sustained severe deformation, deep dents, or irreparable scratches and cracks. These physical damage can make the fender more prone to corrosion and decrease its structural integrity, so it’s best to have it completely replaced.

Vibrations

This symptom occurs when metal fender parts come into contact with each other. It is often accompanied by banging noises. The common culprits behind this problem are corrosion and worn-out fasteners.

It’s important to keep your Toyota Pickup fender in good condition because it plays an important role in your truck’s safety and appearance. Besides decreasing the aesthetic value of your pickup truck, a damaged fender also exposes the rest of the body panels to road spray and damaging road elements. Its capacity to absorb some of the impact in case of a collision will also be diminished.

Driving with a dilapidated fender may even put the safety of other motorists at risk, as it would no longer be effective at blocking dirt and road debris kicked up by your truck’s tires. Small rocks could easily be thrown back at the vehicles behind you, potentially scratching their paint job, or worse, cracking their windshield.

The price of a Toyota Pickup fender replacement ranges from $30 to $100, depending on the brand as well as your truck’s submodel and year. You can buy this component individually, as part of a kit, or in sets of two.

Be careful not to confuse fenders with Toyota Pickup fender flares, since these are two different auto parts. A fender is a body panel, whereas the fender flare is an accessory that you can put on your truck’s fender to improve its appearance and efficiency.

CarParts.com offers a comprehensive selection of Toyota Pickup aftermarket parts, one of which is the fender. Our website’s built-in vehicle selector makes it easier for you to narrow down our Toyota Pickup parts catalog to fenders that are compatible with your truck. Simply plug in its year, make, and model to get specific results.

You might have seen that red Toyota Pickup truck take the ultimate beating in a popular automotive TV show before. That particular 'Yota got hurt so much that it looked terrible. But despite the harsh experiments it took, it was able to run and take a final bow. As car guys ourselves, we do not want that to happen to your truck. But let's face it. In one way or another, there is still a risk that your own Toyota pick-up truck can suffer from similar damage but only less grave. When huge dings, rust spots, or other issues happen to your Toyota pickup fender, then you are sure to replace it. So here are some installation tips in case you have to get a new one.

Tip #1: Get the correct fender for your Toyota pick-up truck.

When we say getting the correct fender for your Toyota pick-up truck, we truly mean it. When picking out the part from your local auto supply store, be very specific with the details of your truck. The year, model, and trim matter very much. This enables you to get the fender that will fit just right when you mount it. A word of caution though: some fender reproductions have slight measurement discrepancy that can put your replacement fender a few centimeters shorter or longer. Be careful.

Tip #2: Consider if you want to mount a flare to your Toyota pick-up fender.

Since you're at it, why not think about mounting a flare to your fender. The fender flare is a nice addition to your truck as it provides extra guard from road debris and adds a little bit of personality.

Tip #3: Get a fellow truck guy to help you with the installation.

We recommend that you tag along a fellow truck guy to help you out with your operation. That person can support the fender as you mount it to your truck. Having someone along can speed up the process.

Tip #4: Do a test mount before finally mounting it to place.

Do a test mount of the Toyota pickup fender. This will help you assess if the fender aligns with the rest of your truck. If it's ok, bolt it down to place.