{
    "lazyNodes": false,
    "abFitnotesFlag": false,
    "abCrawlReviews": false,
    "productOptionsCookie": false,
    "orderDelayFlag": false,
    "skipSessionCookie": false,
    "covidMessage": false,
    "fullTitleCookie": false,
    "nrLoggerCookie": false,
    "checkoutReviewCookie": false,
    "productOptionSeqCookie": false,
    "maintenanceFlag": false,
    "bufferETACookie": false,
    "multiShippingDiscountFlag": false,
    "newFitmentFlag": false,
    "surveyOptInFlag": false,
    "crossSellFlag": false,
    "skuMappingFlag": false,
    "paySplitCookie": false,
    "callDisableFlag": false,
    "zipPaymentFlag": "u",
    "hassleFreeReturn": false,
    "lifetimeReplacement": false,
    "cpn_off": false
}
Guaranteed to Fit2018 GMC Yukon Change Vehicle

Yukon Gear & Axle®
2018 GMC Yukon - Ring and Pinion - Direct Fit, Kit

Tap image and pinch to zoom.
$998.89
Manufacturer #YGK2249
Guaranteed to Fit2018 GMC Yukon Change Vehicle
Qty:
1

Your Vehicle Fit Details

Vehicle Name
Submodel
Engine
Fitment Information
2018 GMC Yukon
SLT
8 Cyl 5.3L
Four Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height)
2018 GMC Yukon
Denali
8 Cyl 6.2L
Four Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height)
2018 GMC Yukon
SLE
8 Cyl 5.3L
Rear Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height)

Highlights

Location:
Rear
Gear Ratio:
3.73
Pinion Spline Count:
27
Includes:
Axle Bearings, Seals, Master Install Kit, and Necessary Small Parts
Recommended Use:
Performance
Product Fit:
Direct Fit
Warranty:
1 year Yukon Gear & Axle limited warranty
Quantity Sold:
Kit
Prop 65 Warning:

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Promotions:
Yukon Ultimate Summer Rebate
Fitnotes:
Four Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height),Rear Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height)

Vehicle Fitment Information

Vehicle Name
Submodel
Engine
Fitment Information
2014 Chevrolet Express 1500
Base
8 Cyl 5.3L
All Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height)
2014 Chevrolet Express 1500
Base
6 Cyl 4.3L
All Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height)
2014 Chevrolet Express 1500
LS
8 Cyl 5.3L
Rear Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height)
2014 Chevrolet Express 1500
LT
8 Cyl 5.3L
Rear Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height)
2014 Chevrolet Suburban 1500
LS
8 Cyl 5.3L
Four Wheel Drive; w/12 Bolt Rear Cover; Casting # 9.5 - located on top side of webbing near the pinion; 9.5 in. GM; Inc. 3.73 Ratio Gear Set; Fits 3.42 Ratio & Up Carrier Case (2.6 in. Tall Deck Height)
Page 1 of 20 | Showing 1 - 5 of 99 results

Product Information

YUKON GEAR & AXLE RING AND PINION

Yukon Gear & Axle’s OE replacement ring and pinion is crafted and inspected to exceptional standards to ensure lasting quality, maximum performance and a seamless fit.

  • Sturdily designed with premium materials for long-lasting performance
  • Meticulously inspected to guarantee consistent functionality
  • Simple to install
  • Precision-formed for exact fitment

Yukon Gear was founded in Washington state – where extreme weather and off-roading are commonplace – and manufactures performance products that were built to perform and built to last in harsh environments.

Need help?Call our product expert1-866-529-0412
Chat with us
Mondays - Sundays7am - 11pm ET | 4am - 8pm PT
Warranty Policy
Right parts, guaranteed. If you find any defects, let us know within 60 days and we’ll take care of it. Check out our Warranty Policy for more details.
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Easy Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund. Check out our Return Policy for more details.

Product Q&A

Customer Reviews