{
"lazyNodes": false,
"abFitnotesFlag": false,
"abCrawlReviews": false,
"productOptionsCookie": false,
"orderDelayFlag": false,
"skipSessionCookie": false,
"covidMessage": false,
"fullTitleCookie": false,
"nrLoggerCookie": false,
"checkoutReviewCookie": false,
"productOptionSeqCookie": false,
"maintenanceFlag": false,
"bufferETACookie": false,
"multiShippingDiscountFlag": false,
"newFitmentFlag": false,
"surveyOptInFlag": false,
"crossSellFlag": false,
"skuMappingFlag": false,
"paySplitCookie": false,
"callDisableFlag": false,
"zipPaymentFlag": "u",
"hassleFreeReturn": false,
"lifetimeReplacement": false,
"cpn_off": false
}Need Help? Call Us1-866-529-0412
Guaranteed to Fit2010 Chevrolet Silverado 2500 HD Change Vehicle
Replacement 2010 Chevrolet Silverado 2500 HD - Front Bumper, Chrome
Tap image and pinch to zoom.
$116.99
$463.05Save: $346.06(75%)
Manufacturer #C010105
Guaranteed to Fit2010 Chevrolet Silverado 2500 HD Change Vehicle
Qty:
1
Your Vehicle Fit Details
Vehicle Name
Submodel
Engine
Fitment Information
2010 Chevrolet Silverado 2500 HD
WT
8 Cyl 6.0L
-
2010 Chevrolet Silverado 2500 HD
LT
8 Cyl 6.0L
-
2010 Chevrolet Silverado 2500 HD
LTZ
8 Cyl 6.0L
-
2010 Chevrolet Silverado 2500 HD
LTZ
8 Cyl 6.6L
-
2010 Chevrolet Silverado 2500 HD
WT
8 Cyl 6.6L
-
2010 Chevrolet Silverado 2500 HD
LT
8 Cyl 6.6L
-
Highlights
Part:
Brand:
Location:
Front
Color Finish:
Chrome
Assembly:
Without mounting bracket(s)
Material:
Steel
Product Fit:
Direct Fit
Recommended Use:
OE Replacement
Quantity Sold:
Sold individually
Replaces OE Number:
15941850
Replaces Partslink Number:
GM1002831
Interchange Part Number:
15941850, GM1002831
Warranty:
1-year Replacement unlimited-mileage warranty
Prop 65 Warning:
WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Returns Policy:
30-Day Return Policy
Vehicle Fitment Information
Vehicle Name
Submodel
Engine
Fitment Information
2007 Chevrolet Silverado 2500 HD
LT
8 Cyl 6.0L
New Body Style
2007 Chevrolet Silverado 2500 HD
LT
8 Cyl 6.6L
New Body Style
2007 Chevrolet Silverado 2500 HD
LTZ
8 Cyl 6.0L
New Body Style
2007 Chevrolet Silverado 2500 HD
LTZ
8 Cyl 6.6L
New Body Style
2007 Chevrolet Silverado 2500 HD
WT
8 Cyl 6.6L
New Body Style
Page 1 of 8 | Showing 1 - 5 of 39 results
Product Information
Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs - an OE replacement product for your damaged or aged factory part.
Replacement - the most affordable brand name for replacement parts that you need! Replacement is a professional brand for autobody, lighting parts, electrical, brake, suspension, intake and exhaust, and cooling and heating products. All Replacement brands include 1-year, unlimited-mileage warranty.
Need help?Call our product expert1-866-529-0412
Chat with us
Mondays - Sundays7am - 11pm ET | 4am - 8pm PT
Warranty Policy
Right parts, guaranteed. If you find any defects, let us know within 60 days and we’ll take care of it. Check out our Warranty Policy for more details.
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Easy Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund. Check out our Return Policy for more details.
Product Q&A
1
How do I get the dam thing off?Jim S.May 23, 2020
Best Answer:Open your hood. Start by removing the panel clips and panel covering your grill.
Remove the bolts holding the grill to the core support. Remove the grill.
From underneath the truck, on the left and right sides, find the curved support tubes that attach to the bumper near the fog lights. Using an 18 mm socket or wrench, remove the bolts attached to the outer ends of the support tubes. Disconnect fog lights at the connector.
From the top, behind the bumper, you will see the frame rails extend into the area under where the grill was mourned. On the end of the frame rails, loosen the vertical bolts going through the bumper brackets using an 18MM socket or wrench. Leave the bolts in the holes. Get some help, hold the bumper and entire lower valance assembly in place and remove the two vertical bolts.
The entire bumper assembly with the lower valance will pull out as one piece.
Find a suitable work table to place the bumper assembly on.
You will need to remove the valance, brackets and everything else attached to the bumper.
Change out the bumper and assembly in reverse order. Removing and Installing the bumper and valance as an assembly is easier than trying to take individual parts and pieces off while underneath the truck.
After the bumper and valance are installed, reconnect the fog lights.
Reinstall the grill and cover panel.
John H.Jun 04, 20201
Is this the whole bumper or do I need other parts?MarieApr 25, 2020
Best Answer:Hi Naiomi,
Thank you for your inquiry on our bumper!
Yes, you're right! This is the whole bumper. So we can better assist you if there's other parts you need to replace, please call us at 1-866-529-0412.
We look forward to doing business with you.
Thank you,
KhristineB
Parts Specialist
<a href="http://CarParts.com" target="_blank">CarParts.com</a>
Khristine M.STAFFApr 26, 20200
Does this part fits 2007 silverado 1500?YeaShJan 23, 2021
Best Answer:Hi Sau,
This is not compatible. This is for silverado 2500/3500 HD fitment. The correct part number is REPF010106.
<a href="https://www.carparts.com/bumper/replacement/repf010106?&vehicle[cylinders]=8&vehicle[liter]=5%2E3&vehicle[submodel]=LT&vehicle[model]=Silverado_1500&vehicle[make]=Chevrolet&vehicle[year]=2007" target="_blank">https://www.carparts.com/bumper/replacement/repf010106?&vehicle[cylinders]=8&vehicle[liter]=5%2E3&vehicle[submodel]=LT&vehicle[model]=Silverado_1500&vehicle[make]=Chevrolet&vehicle[year]=2007</a>
Jeonino E.STAFFJan 23, 20210
How wide is the inner open area?Chevy man 206Mar 21, 2021
Best Answer:Hi Tyler,
Unfortunately, we do not have that data readily available. This direct fit front bumper in Chrome finish is a guaranteed and direct fit part specifically designed only for the selected vehicle application covering from 2007 to 2010 Chevrolet Silverado, 1500(2009 to 2013) /2500/3500 HD, all submodels, all engines, New Body Style fitment. If you have the matching vehicle, this will fit and will be compatible. The dimensions of the part is not noted anymore since you have to accurately select your vehicle application(year, make model, submodel and engine size, drivetrain if needed-2WD,4WD/AWD) and the resulting search would show the exact parts designed for that specific vehicle application only. You’ll see a “Guaranteed to Fit, Direct fit” note/badge (in round green icon with a white check mark) if the part will fit 100%.
Jeonino E.STAFFMar 21, 20210
Does this number also come primed for paint?Doug S.Aug 31, 2020
Best Answer:Hi Douglas,
The front bumper has a chrome finish already. Once you receive this, all you have to do is install it.
Jeonino E.STAFFAug 31, 2020Customer Reviews
Hassle free ordering and shipping! Not sure how thick the chrome is on the bumper! Time will tell...
Todd S.
VERIFIED PURCHASER
Purchased on Jul 09, 2022
Good looking product that matched right up once I figured it out. I hit metal post so it took me longer as some of the mounting hardware was bent so I had to bend some brackets back to fit perfectly.
Brandon S.
VERIFIED PURCHASER
Purchased on Oct 27, 2022
Great fit and finish.
Douglas E.
VERIFIED PURCHASER
Purchased on Dec 28, 2021