{
    "lazyNodes": false,
    "abFitnotesFlag": false,
    "abCrawlReviews": false,
    "productOptionsCookie": false,
    "orderDelayFlag": false,
    "skipSessionCookie": false,
    "covidMessage": false,
    "fullTitleCookie": false,
    "nrLoggerCookie": false,
    "checkoutReviewCookie": false,
    "productOptionSeqCookie": false,
    "maintenanceFlag": false,
    "bufferETACookie": false,
    "multiShippingDiscountFlag": false,
    "newFitmentFlag": false,
    "surveyOptInFlag": false,
    "crossSellFlag": false,
    "skuMappingFlag": false,
    "paySplitCookie": false,
    "callDisableFlag": false,
    "zipPaymentFlag": "u",
    "hassleFreeReturn": false,
    "lifetimeReplacement": false,
    "cpn_off": false
}
Guaranteed to Fit1998 Audi Cabriolet Change Vehicle

DriveMotive
1998 Audi Cabriolet - Fuel Pump, without Fuel Sending Unit, Stud Connector Shape, 56.0 GPH Maximum Flow Rating

Tap image and pinch to zoom.
$46.49
Manufacturer #REPV314514
Guaranteed to Fit1998 Audi Cabriolet Change Vehicle
Qty:
1

Your Vehicle Fit Details

Vehicle Name
Submodel
Engine
Fitment Information
1998 Audi Cabriolet
Base
6 Cyl 2.8L
-

Highlights

Location:
In-line
Notes:
Fuel Pump Motor; Stud Connector Shape; 56.0 gph Maximum Flow Rating
Assembly:
Pump Only
Fuel Sending Unit Included:
Without Fuel Sending Unit
Pressure Sensor Included:
Without Pressure Sensor
Condition:
New
Quantity Sold:
Sold individually
Recommended Use:
OE Replacement
Operation:
Electric
Product Fit:
Direct Fit
Flow Rate:
26 gallons/hour
Prong Connector:
1 electrical connector; 2-prong pin connector
Replaces OE Number:
145054
Warranty:
1-year DriveMotive unlimited-mileage warranty
Prop 65 Warning:

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Interchange Part Number:
P60424, FD0010, 69429, 145054
Returns Policy:
30-Day Return Policy

Vehicle Fitment Information

Vehicle Name
Submodel
Engine
Fitment Information
1976-1977 Volkswagen Scirocco
Base
4 Cyl 1.6L
-
1977 Audi 100 Series
LS
4 Cyl 1.9L
-
1977 Porsche 911
S
6 Cyl 2.7L
-
1977 Volkswagen Rabbit
Base
4 Cyl 1.6L
-
1977 Volkswagen Rabbit
Custom
4 Cyl 1.6L
-
Page 1 of 22 | Showing 1 - 5 of 107 results

Product Information

DriveMotive FUEL PUMP

DriveMotive fuel pumps deliver the right amount of fuel for all loads and speeds. Built to last and engineered for clean, consistent flow, DriveMotive fuel pumps are ready to restore smooth performance and superior efficiency to your engine.

Features & Benefits:

Engaged Manufacturing

  • All internal components comply with ISO 9001 and QS 9000 manufacturing standards and have undergone rigorous electrical, pressure, and sensor testing.

Durability

  • Dynamic electrical pumping action maintains energy-efficient output, regardless of fuel additive blends entering the system.
  • High-strength plastics and anti-corrosive alloys machined to sustain at least 1 million cycles within the vehicle's service life.
  • Inlet filtration strainer prevents micron-sized particles from slipping into the system.

Correct Fit

  • Form-fitting molding and dimensionally correct pump allow for proper in-tank or outside-tank mounting.
Need help?Call our product expert1-866-529-0412
Chat with us
Mondays - Sundays7am - 11pm ET | 4am - 8pm PT
Warranty Policy
Right parts, guaranteed. If you find any defects, let us know within 60 days and we’ll take care of it. Check out our Warranty Policy for more details.
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Easy Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund. Check out our Return Policy for more details.

Product Q&A

0
Is the check valve have to be on pump or can it be replaced with a Bangor fitting?Ricky PJun 20, 2021
Best Answer:Hi Ricky, I'm glad to assist you. The check valve is a separate part. Please refer to a vehicle specific service repair manual for your vehicle to get the proper guide to fix or install your fuel pump on your car. Sorry, we do not have a specific repair manual to give an accurate answer to your question. But once you have checked on your end, please click the link below to order this part today and take advantage of our ongoing promo sale price for this part. I hope this helps. Happy shopping. <a href="https://www.carparts.com/fuel-pump/drivemotive/repv314514?can=CPJE1043" target="_blank">https://www.carparts.com/fuel-pump/drivemotive/repv314514?can=CPJE1043</a>
Jeonino E.STAFFJun 20, 2021
0
What size is the discharge banjo fitting diameter?  I purchased a pump from a different source (which promised to fit) and found that the discharge fitting is 12mm.... I need a 10mm discharge fitting which was original on my 1977 911S Targa. Unfortunately these size details are not provided.GuestDec 26, 2020
Best Answer:Hi Guest, This has a 12 mm discharge fitting.
Aldrin P.STAFFDec 26, 2020
0
Will this work,on a gravity fed fuel system for a farm tractor ?A shopperJul 16, 2020
Best Answer:Hello! This is meant for much higher pressure fuel injection systems. You might be able to get away with a low pressure transfer/lift pump made for carbureted cars
Mitchell D.STAFFJul 16, 2020

Customer Reviews

My fuel pump I ordered came with a nice dent in it due to the way it was packaged but luckily still works, good fuel pump, does what it's supposed to.
Purchased on Jul 05, 2017
Exactly what I needed for my 1994 Audi Cabriolet
Ashton L.
VERIFIED PURCHASER
Purchased on May 27, 2020
Great part and great price! OEM direct fit! It is an awesome and a wonderful website. Thank you for you parts website.
John D C.
VERIFIED PURCHASER
Purchased on Apr 23, 2020