{ "lazyNodes": false, "abFitnotesFlag": false, "abCrawlReviews": false, "productOptionsCookie": false, "orderDelayFlag": false, "skipSessionCookie": false, "covidMessage": false, "fullTitleCookie": false, "nrLoggerCookie": false, "checkoutReviewCookie": false, "productOptionSeqCookie": false, "maintenanceFlag": false, "bufferETACookie": false, "multiShippingDiscountFlag": false, "newFitmentFlag": false, "surveyOptInFlag": false, "crossSellFlag": false, "skuMappingFlag": false, "paySplitCookie": false, "callDisableFlag": false, "zipPaymentFlag": "u", "hassleFreeReturn": false, "lifetimeReplacement": false, "cpn_off": false }
WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
WHITELINE CONTROL ARM GEOMETRY CORRECTION KIT
Hard acceleration and braking allow the lower control arms to move around significantly causing axle tramp, poor launch and power delivery. Due to the dynamic nature of these lower control arm bushings this also alters the bump steer characteristics effectively generating significant 'toe in' under hard braking. When replacing the rear caster bushing with a low compliance bushing this alters the dynamic effect within the bump steer so Whiteline has cleverly packaged these items together to give you additional camber during turn in which is achieved through the offset in the low compliance bushing, improved anti lift geometry and neutralised bump steer correction. Whiteline control arm geometry correction kit tightens up the front suspension and makes it more nimble and responsive during acceleration, braking and cornering.
Whiteline, world-renowned for its innovative automotive suspension technologies, provides enthusiasts with performance solutions engineered to last.