{
    "lazyNodes": false,
    "abFitnotesFlag": false,
    "abCrawlReviews": false,
    "productOptionsCookie": false,
    "orderDelayFlag": false,
    "skipSessionCookie": false,
    "covidMessage": false,
    "fullTitleCookie": false,
    "nrLoggerCookie": false,
    "checkoutReviewCookie": false,
    "productOptionSeqCookie": false,
    "maintenanceFlag": false,
    "bufferETACookie": false,
    "multiShippingDiscountFlag": false,
    "newFitmentFlag": false,
    "surveyOptInFlag": false,
    "crossSellFlag": false,
    "skuMappingFlag": false,
    "paySplitCookie": false,
    "callDisableFlag": false,
    "zipPaymentFlag": "u",
    "hassleFreeReturn": false,
    "lifetimeReplacement": false,
    "cpn_off": false
}
2003 Mazda B4000

2003 Mazda B4000 Clutch Kits

Refine by:

Shop Catalog

Showing 1 - 8 of 8 results
Sort by:
Clutch Kit, Self-Adjusting design (OE style), 10 1/8 in. Clutch Diameter, 23 Tooth Spline, 1 in. Input Shaft Diameter, Release Bearing Must Be Serviced With Slave Cylinder - Not Included, With Alignment Tool, Without Flywheel -
Part Number: PFCMU21171
Guaranteed to Fit
$155.49
Vehicle Fitment
  • 2003 Mazda B4000 Base 6 Cyl 4.0L Self-Adjusting design (OE style), 10 1/8 in. Clutch Diameter, 23 Tooth Spline, 1 in. Input Shaft Diameter, Release Bearing Must Be Serviced With Slave Cylinder - Not Included
  • 2003 Mazda B4000 SE 6 Cyl 4.0L Self-Adjusting design (OE style), 10 1/8 in. Clutch Diameter, 23 Tooth Spline, 1 in. Input Shaft Diameter, Release Bearing Must Be Serviced With Slave Cylinder - Not Included
  • 2003 Mazda B4000 DS 6 Cyl 4.0L Self-Adjusting design (OE style), 10 1/8 in. Clutch Diameter, 23 Tooth Spline, 1 in. Input Shaft Diameter, Release Bearing Must Be Serviced With Slave Cylinder - Not Included
Product Details
Notes : Diaphragm Style, Dampened Clutch Disc Type, Contents: Cover, Disc, Pilot Bearing or Bushing, Alignment Tool, Hydraulic Line Tool, Spline LubricantQuantity Sold : KitRecommended Use : OE ReplacementMaterial : Organic DiscProduct Fit : Direct FitAlignment Tool Included : With Alignment ToolFlywheel Included : Without FlywheelRelease Bearing Included : Without Release BearingClutch Disc Included : With Clutch DiscPilot Bushing Included : With Pilot BushingDisc Diameter : 10.13 in. Disc Dia.Spline Count : 23 SplineWarranty : 1-year Perfection limited warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Series : Perfection Clutch OE Replacement
Standard; With Slave Cylinder Bearing Not Included in Clutch Kit), With Alignment Tool, Without Flywheel, With Release Bearing -
Part Number: S2S2K7031301
Guaranteed to Fit
$265.49
Vehicle Fitment
  • 2003 Mazda B4000 Base 6 Cyl 4.0L Standard; With Slave Cylinder Bearing Not Included in Clutch Kit)
  • 2003 Mazda B4000 SE 6 Cyl 4.0L Standard; With Slave Cylinder Bearing Not Included in Clutch Kit)
  • 2003 Mazda B4000 DS 6 Cyl 4.0L Standard; With Slave Cylinder Bearing Not Included in Clutch Kit)
Product Details
Quantity Sold : KitRecommended Use : OE ReplacementProduct Fit : Direct FitAlignment Tool Included : With Alignment ToolFlywheel Included : Without FlywheelRelease Bearing Included : With Release BearingWarranty : 1-year Sachs limited warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Promotions : Sachs and TRW Sale
Clutch Kit, Luk Global Number 626 3017 77, With Alignment Tool, Without Flywheel, With Release Bearing, Luk OE Replacement -
Part Number: LUK07167
Guaranteed to Fit
$207.49
Vehicle Fitment
  • 2003 Mazda B4000 Base 6 Cyl 4.0L Luk Global Number 626 3017 77
  • 2003 Mazda B4000 SE 6 Cyl 4.0L Luk Global Number 626 3017 77
  • 2003 Mazda B4000 DS 6 Cyl 4.0L Luk Global Number 626 3017 77
Product Details
Quantity Sold : KitRecommended Use : Stock Replacement DiscProduct Fit : Direct FitAlignment Tool Included : With Alignment ToolFlywheel Included : Without FlywheelRelease Bearing Included : With Release BearingWarranty : 1-year or 12,000-mile LuK limited warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Series : Luk OE Replacement
Clutch Kit, With Alignment Tool, Without Flywheel, With Release Bearing, Valeo OE Replacement -
Part Number: VLE828999
Guaranteed to Fit
$284.49
Vehicle Fitment
  • 2003 Mazda B4000 Base 6 Cyl 4.0L
  • 2003 Mazda B4000 SE 6 Cyl 4.0L
  • 2003 Mazda B4000 DS 6 Cyl 4.0L
Product Details
Quantity Sold : KitRecommended Use : OE ReplacementProduct Fit : Direct FitAlignment Tool Included : With Alignment ToolFlywheel Included : Without FlywheelRelease Bearing Included : With Release BearingDisc Diameter : 10.13 in. Disc Dia.Warranty : 1 year or 12,000-mile Valeo limited warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Series : Valeo OE Replacement
Clutch Kit, Naturally Aspirated, Standard Transmission, With Alignment Tool, Without Flywheel, Without Release Bearing, Dual Friction Series -
Part Number: C78DF145117
Guaranteed to Fit
$609.95
Vehicle Fitment
  • 2003 Mazda B4000 Base 6 Cyl 4.0L Naturally Aspirated, Standard Transmission
  • 2003 Mazda B4000 SE 6 Cyl 4.0L Naturally Aspirated, Standard Transmission
  • 2003 Mazda B4000 DS 6 Cyl 4.0L Naturally Aspirated, Standard Transmission
Product Details
Quantity Sold : KitRecommended Use : PerformanceMaterial : Organic DiscProduct Fit : Direct FitAlignment Tool Included : With Alignment ToolFlywheel Included : Without FlywheelRelease Bearing Included : Without Release BearingDisc Diameter : 10 1/8 in. Disc Dia.Warranty : 90-day Centerforce limited warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemicals including Nickel compounds and dusts, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Specialty Part : Performance Part by JCWSeries : Dual Friction Series
Clutch Kit, Conventional version (aftermarket style), 10 1/8 in. Clutch Diameter, 23 Tooth Spline, 1 in. Input Shaft Diameter, Release Bearing Must Be Serviced With Slave Cylinder - Not Included, With Alignment Tool, Without Flywheel -
Part Number: PFCMU521171
Guaranteed to Fit
$131.99
Vehicle Fitment
  • 2003 Mazda B4000 Base 6 Cyl 4.0L Conventional version (aftermarket style), 10 1/8 in. Clutch Diameter, 23 Tooth Spline, 1 in. Input Shaft Diameter, Release Bearing Must Be Serviced With Slave Cylinder - Not Included
  • 2003 Mazda B4000 DS 6 Cyl 4.0L Conventional version (aftermarket style), 10 1/8 in. Clutch Diameter, 23 Tooth Spline, 1 in. Input Shaft Diameter, Release Bearing Must Be Serviced With Slave Cylinder - Not Included
  • 2003 Mazda B4000 SE 6 Cyl 4.0L Conventional version (aftermarket style), 10 1/8 in. Clutch Diameter, 23 Tooth Spline, 1 in. Input Shaft Diameter, Release Bearing Must Be Serviced With Slave Cylinder - Not Included
Product Details
Notes : Diaphragm Style, Dampened Clutch Disc Type, Contents: Cover, Disc, Pilot Bearing or Bushing, Alignment Tool, Spline LubricantQuantity Sold : KitRecommended Use : OE ReplacementMaterial : Organic DiscProduct Fit : Direct FitAlignment Tool Included : With Alignment ToolFlywheel Included : Without FlywheelRelease Bearing Included : Without Release BearingClutch Disc Included : With Clutch DiscPilot Bushing Included : With Pilot BushingDisc Diameter : 10.25 in. Disc Dia.Spline Count : 23 SplineWarranty : 1-year Perfection limited warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Series : Perfection Clutch OE Replacement
Clutch Kit, With Alignment Tool With Flywheel Without Release Bearing
Part Number: H29931000
Universal Fit
$810.95
Product Details
Quantity Sold : KitRecommended Use : PerformanceProduct Fit : UniversalAlignment Tool Included : With Alignment ToolFlywheel Included : With FlywheelRelease Bearing Included : Without Release BearingWarranty : 90-day Hays limited warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Clutch Kit, With Alignment Tool With Flywheel Without Release Bearing
Part Number: H29931001
Universal Fit
$810.95
Product Details
Quantity Sold : KitRecommended Use : PerformanceProduct Fit : UniversalAlignment Tool Included : With Alignment ToolFlywheel Included : With FlywheelRelease Bearing Included : Without Release BearingWarranty : 90-day Hays limited warrantyProp 65 Warning :

Warning SymbolWARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Page 1 of 1 | Showing 1 - 8 of 8 results

Popular Products