A: The oil pressure switch is usually located in the cylinder block near the oil filter or its housing. Older vehicles might also have the switch wired to the oil pressure gauge.
The oil pressure switch monitors the oil pressure and illuminates the warning light or the oil pressure indicator when the pressure falls below a certain threshold. It also notifies you when the pressure becomes too high. This typically only happens when the oil pump relief valve is stuck closed. Low oil pressure is also an issue with vehicles that have timing chain tensioners that are oil-driven. If the oil pressure goes below about 25 psi on a 5.4L three-valve, for example, the timing chain will rattle and can fail.
Incorrect oil pressure can affect the engine’s longevity and performance, making the oil pressure switch crucial to keeping the engine in great condition.
Low oil pressure is also an issue with vehicles that have timing chain tensioners that are oil-driven.
– Richard McCuistian, ASE Certified Master Automobile Technician
Note that the effectiveness of these tips may vary because the exact location of the switch depends on the vehicle. To start, remove the wire connected from the oil pressure switch to the oil pan. Then, push off the prong to safely remove the wire, which should expose the switch. Use a socket wrench if you want to remove it.
And since the wire, oil pressure switch, and oil pan all tend to get dirty, it might be easier to wipe off the accumulated grease first. This way, you’ll have a better grip.
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.