The electronic throttle control (ETC) system (or drive-by-wire) is a system that electrically opens a vehicle’s throttle valve. It consists of a throttle body motor that is monitored by the powertrain control module (PCM). If the PCM determines during a system self-test that the electronic throttle body is unable to close properly, engine code P2111 will be logged by on-board diagnostics.
Diagnostic trouble code (DTC) P2111 stands for “Throttle Actuator Control System Stuck Open.” This DTC sets when the PCM detects an indication that the throttle plate is at a greater angle than the PCM has commanded. Ford refers to the electronic throttle body as a Throttle Actuator Control Motor (TACM).
Possible causes on a Ford vehicle are listed as follows but are similar on other vehicles:
The throttle motor controls the movement of the throttle plate, allowing more or less air to flow through the engine depending on how fast the driver wants to go. This is possible because of the PCM (or a dedicated throttle control module), which changes the current that flows through the motor to move the throttle plate to its desired position.
A problem with the throttle actuator control system may cause the PCM to restrict its operations. This is known as the “limp home mode” or a “fail-safe” position, where the engine is held at idle or has limited power to prevent unwanted acceleration.
Note: The definition of code P2111 may be different depending on the vehicle manufacturer. Consult the appropriate repair manual or repair database for the exact code definition.
Trouble code P2111 is a generic powertrain DTC that applies to vehicles equipped with a drive-by-wire throttle control system. While different makes may exhibit similar symptoms, protocols for diagnosing and repairing each one may vary depending on the automaker’s specifications.
If you’re someone who’s not familiar with diagnosing DTCs on your own, it’s a good idea to bring your vehicle to a licensed mechanic to get a proper diagnosis. But if you’re a seasoned DIYer who knows your way around diagnosing trouble codes, then you may do so yourself. To help you out, we’ve rounded up a couple of videos that show what steps the process might involve:
Fixing the issues related to your vehicle’s throttle actuator control system may be a confusing task if you don’t have the right tools and automotive know-how. If you’re not confident with your DIY skills yet, it’s best to leave the job to a certified mechanic to ensure that all necessary steps in repairing your vehicle are done correctly.
If you plan on diagnosing and repairing your vehicle on your own, repair manuals and repair databases are extremely helpful because they provide vehicle-specific repair information.
Please note that although the throttle body has an internal spring designed to close the throttle plate for safety, while the PCM is engaged, the throttle motor drives the throttle blade open and closed, so never put your finger in the throttle body. If the motor is driving the throttle blade shut it can seriously injure your finger.
Also, some throttle bodies can be ruined to the point of needing replacement if you simply open the throttle plate by hand on the bench. This can blindside you if you have managed to open a throttle plate without ruining it. Always err on the side of caution.
So, to prevent severe personal injury and/or expensive mistakes, keep your fingers out of the throttle body at all times. If you need to clean the throttle body, have an assistant turn on the key (not start the engine) and open the throttle plate by pressing the accelerator pedal. And do the cleaning with a toothbrush, not your fingers and a rag.
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.