The key is one of the most important vehicle accessories/components. After all, you can’t get in and out of the car without it, let alone start the engine. These keys are more fragile than you think, as even the slightest of bends may render a key useless. Luckily, there are ways to remedy the issue.
Before you attempt to fix your car key, it’s best to test it first. If the bend isn’t too severe, you may be able to use it until you get a new one or have it repaired. However, avoid putting the key inside the ignition if the bend looks severe.
Doing so may break the key in half, making removing it difficult. If the key fob still works and your car is keyless, then you shouldn’t have an issue starting and driving your car. But regardless of the damage, it’s still best to have a bent key replaced or repaired.
Before you straighten your bent car key, ensure you have a vise, a pair of pliers, and a workbench/table. Afterward, follow the steps below:
If the key breaks inside the lock, it’s better to leave it to a professional locksmith. They’ll have the tools and expertise to safely remove the key and deal with the lock if it’s damaged.
The worst-case scenario is they’ll remove the key and create a duplicate if the original is too damaged. A locksmith may charge between $25 and $100 for traditional car keys, $100 and $250 for transponder keys, and $200 and $500 for smart keys.
Avoid straightening the key if it shows resistance, as this may lead to cracks and potential breakage.
A twisted key will likely break in the future. You should always get a replacement key, even if you managed to straighten the bent one, just in case it breaks.
Straightening a bent key is only a temporary solution, and having spare keys around is always convenient.
Some causes of a bent car key are misuse, the key’s material/design, and sticky/worn locks. There are also uncommon reasons why your key may bend, such as prolonged exposure to heat.
Misuse is arguably the most common way to bend a car key. Using keys as makeshift tools to open containers, screwdrivers, etc., applies excessive force on the key that leads to bending. Similarly, forcing the key on a different lock may even cause it to break in half.
Car keys come in different materials and sizes. While they’re built to withstand force, some of the keys are long and thin and made from softer metals more prone to bending under stress.
This circles back to misuse and understanding how much force your key can withstand before bending. As much as possible, avoid applying excess force to any key type, especially long and thin ones.
Your door lock was lubricated with graphite during the manufacturing process. Over time, this lubrication dries out and could cause the lock to become sticky or faulty, making it difficult to turn the keys.
This resistance may lead to breakage, making it crucial to lubricate the lock every now and then. One way to do this is to use a screwdriver to open the door lock and spray lubricant inside.
Properly using a car key is the easiest way to prevent it from bending. Only use it to lock or unlock your car doors or start the vehicle. Avoid forcing the key to turn, especially if met with resistance, as it could break inside the lock.
You should also inspect the keys and locks for wear to prevent excessive force caused by worn keys or sticky/faulty door locks. Clean any debris you see on your key and apply lubrication to the door locks to reduce friction.
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.