Your car’s water pump is a fairly simple device—but it has an important job to do. As its name implies, the water pump “pumps” a coolant mixture through the vehicle’s cooling system. If it weren’t for the water pump, your car’s engine would quickly overheat.
Although the water pump is designed to last the life of the vehicle, that doesn’t always happen. The pump may start to leak, its bearings may go bad, or its impeller may wear away from corrosion. Any of these issues will cause the pump to fail prematurely, resulting in noticeable symptoms.
A faulty water pump can cause several issues. If you’re concerned that your water pump may be on it’s way out, these are the primary symptoms to watch out for:
A water pump can develop leaks—and that can lead to a low coolant level and engine overheating. Also, a water pump that has failed internally will impede coolant circulation, causing the engine to overheat. Either scenario is bad news.
Leaks are a very common problem with water pumps. The leaks may originate from the water pump itself or the pump’s gasket.
If your car’s water pump goes out, one or more warning lights may pop up on the dash. For example, you may see the low coolant warning, overheat warning, or a check engine light. The temperature gauge (if your car has one) will climb, as well.
In some cases, the water pump’s bearings may start to fail, resulting in an audible whining or growling noise when the engine is running.
Your car’s heater requires hot engine coolant to operate properly. As such, a problem with the cooling system, such as a bad water pump, can lead to an inoperative heater.
On some vehicles, the water pump is driven off the timing chain inside the engine. When the pump or its gasket fails, the resulting leaks can cause coolant to mix with the oil inside of the engine. This is a common problem on the Ford 3.5L and 3.7L EcoBoost V6 engines.
As was mentioned, the water pump forces coolant through the cooling system. The water pump contains an impeller—a circular component with fan-like blades—that rotates on a shaft and bearings.
Most water pumps are driven by the engine’s drive belt, timing belt, or timing chain. When the engine is running, the belt or chain turns the water pump’s pulley, causing the impeller to spin. The impeller draws coolant from the radiator, then pumps that coolant through the engine and heater core.
Although belt-driven water pumps are still common, a growing number of late-model cars now have electric water pumps. Electric pumps are more efficient since they put zero drag on the engine. Because the design doesn’t require a running internal combustion engine, it also works well in hybrid and electric vehicles.
It’s also worth noting that some modern cars have multiple water pumps. Some systems use two or more electric pumps, while others use a combination of mechanical and electric pumps.
You might be wondering: Can you drive your car with a bad water pump? And the answer is— absolutely not. A failed water pump almost always leads to overheating, which, in turn, can cause extensive engine damage.
Check out this video for tips on how to replace your water pump:
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.
View Comments
Thats strange I have 5.4 l triton v8 no heat drove it no sighn of overheating. Upon inspection of water pump the fan blades where compleatly crodded to point that they were just a flat peice of metal barely left. Basicly shaft only what a shock to me it did not overheat at all on me. Bought van used.
Hi John,
It sounds like you got lucky! Glad you found and replaced the bad water pump before it caused any problems.