Garage stools are the perfect complement to your workspace. These chairs let you rest your feet while you work. They come in different shapes and sizes. Some come with a backrest, an adjustable seat, and more.
You can use these stools to spruce up your garage and make working on your vehicle easier and more convenient.
The Gas Cap is the part of the vehicle that keeps fuel inside the fuel tank. It’s a protective seal that not only keeps gas in but also keeps contaminants out. A secure gas cap helps reduce overall emissions and maximizes fuel efficiency, all while keeping the fuel system clean and operational.
The gas cap seal sits between the gas cap and fuel tank. The seal effectively stops fuel and fuel vapor from escaping. Fuel vapor is harmful to the environment, so this seal reduces emissions. At the same time, a gas cap seal prevents gas from leaking out when the vehicle is on the road. The gas cap seal might seem like an inconsequential part, but fuel and fuel vapor are highly volatile. A leak can cause the vehicle to catch fire. Hence, a good seal is critical in preventing vehicle fires and maintaining safety.
The gas cap tether is a cable that connects the fuel cap to your vehicle. It reduces the risk of accidentally dropping, misplacing, or losing the cap. Made from a durable and flexible material, the tether can withstand the shock of the cap suddenly dropping. Most factory-issue gas caps come with tethers, but a replacement tether is usually sold separately from the cap. A clip attaches the gas cap tether to the cap.
A Gas Filler Patch is a panel designed to replace the section of a vehicle’s body surrounding its fuel fill inlet, where gas is fed into the gas tank. The patch is formed with one hole cut to the size and shape of the vehicle’s fuel fill inlet. Smaller holes occasionally surround the larger one to allow for bolts or screws. These patches are typically used when the area around the fuel fill inlet has been damaged by rust.
Gaskets in vehicles are typically placed between two surfaces. Gaskets are found in many parts of a vehicle, and they have two main functions; to prevent leaks and withstand pressure. In the engine, gaskets play a crucial role in preventing fluids like oil and coolant from leaking and mixing. In other parts such as the interior, gaskets prevent water from entering the cabin. Gaskets can also be made from a wide variety of materials. For example, gaskets inside an engine can be made of metal, while gaskets in a vehicle’s interior can be made of rubber. Gaskets are typically replaced in routine maintenance.
The gasket sealant is a heat-resistant solid sealant that temporarily repairs a damaged gasket, allowing it to continue working until it can be replaced. You can use this to fix a damaged gasket temporarily so you can drive your vehicle even if you cannot replace the gasket immediately. Gasket sealant is applied to the damaged part of the gasket, restoring the integrity of the seal. The gasket needs sealant if it is loose or has minor damage.
The Gasket Sheet, also known as gasket paper, is a large sheet that joins surfaces or components together in a quick, cost-effective way. It is typically made from silicone rubber, cork, or nitrile and varies in thickness. It typically comes in an o-ring shape and acts as a leak-proof seal between two parts. Some gasket sheets are also resistant to oil and high pressures and temperatures. Depending on the material it’s made out of, some also provide electrical insulation.
The Gauge Bulb is a component of the dashboard that lights up the gauges and meters to make it easier to see them. These gauge bulbs come in many different colors depending on the gauge it is assigned to.
The gauge bulb is typically found on the driver’s side of the dashboard.
The Gauge Controller collects the vehicle’s performance information and puts the data on the display screen. This accessory lets you customize the display pages to show what you desire and where you wish that object to appear. The gauge controller plugs into the OBD2 port or a similar port and works in models with a driver information center. The various sensors in your vehicle rely on the gauge controller to present their information accurately and quickly.
The gauge dimmer module is a device located on some vehicle dashboards which allows the driver to control the intensity of the dashboard lights. Controlling these lights can be a great feature since dashboard lights can appear too bright because of our eyes’ ability to dilate in low-light situations. Having the ability to make the gauge cluster dimmer can relieve eye strain when driving at night. Controlling the dashboard lights can also make the gauge cluster more visible during the daytime.
A gauge face can either be the plastic trim that surrounds a vehicle gauge cluster, or the plastic surface inside the gauge cluster that has printed tachometer and speedometer labels. The gauge face that has printed labels can also include the fuel gauge, temperature gauge, and warning lights, among other pertinent vehicle information.
As vehicles age, gauge faces can eventually discolor or even crack. Aftermarket gauge faces are good for owners who want to customize their vehicle’s dashboard or make it like new again.
The gauge kit is a collection of parts that contains everything you need to replace the old or faulty instrument cluster on your car’s dashboard. This kit might be required when you replace the cluster while repairing, upgrading, or customizing your vehicle. Gauge kits have everything you need to install a new instrument cluster with additional gauges. The car dashboard will need a gauge kit to display everything you need to know about your car’s current condition.
The Gauge Lens is a clear piece of plastic or plexiglass that covers the stock turn signal lights on a GM vehicle’s instrument cluster display. Also known as the cluster lens, the gauge lens protects the speedometer, odometer, fuel gauge, tachometer, and engine temperature gauge. It’s prone to scratches because of its plastic material, and it can also get dirty if it isn’t cleaned regularly. To detach the gauge lens from your instrument panel, you’ll have to unlock the ear tabs holding it in place.
The Gauge Magnet is a special type of magnet used in certain types of tachometers. They allow these gauges to measure the RPM in a vehicle engine for the purpose of diagnostics or gear shift assistance. Direct contact with the rotating shaft is necessary to make use of the tachometer’s magnetic sensor. Gauge magnets are often sold separately from the tachometer in repair kits paired with adhesive compound and sandpaper. This allows for the repair of older or damaged tachometers.
The Gauge Mounting Bracket helps secure an instrument gauge to the instrument cluster or dashboard. This part might be needed if you have fitment issues with new instrument gauges or need to replace old and damaged mounting brackets. Gauge mounting brackets are mounted in a vehicle’s instrument cluster or dashboard, and they help prevent the gauges from vibrating while you drive. Instrument gauges need these parts for secure mounting and reliable operation.
The gauge panel is the metal or plastic trim surrounding one of the dials on the dashboard or the entire gauge cluster. The gauge panel can be the component that holds individual instrument dials and allows them to be mounted on your vehicle’s dashboard. Gauge panels are typically mounted using screws or bolts to ensure that they’re securely attached, ensuring that they don’t move or vibrate while the vehicle is on the road.
The gauge pod is a part that houses various instrument gauges on the dashboard. You might need this if your current gauge pod is worn out or damaged. Gauge pods are usually mounted on a vehicle’s dash, and they protect the gauges from exposure to dirt, moisture, and direct sunlight. Instrument gauges like the fuel gauge, oil pressure gauge, and speedometer are housed in the gauge pod.
The Gauge Sending Unit is a mechanical device that reads the vehicle’s current oil pressure levels, liquid temperature, and other important vehicle readings and then relays these to the related gauge. For example, a temperature sensor gauge sending unit is usually mounted on the radiator hose, where it reads the coolant’s temperature. It then sends this reading to the temperature gauge, which displays the reading on your dashboard and informs you if your engine is overheating.
As its name suggests, the Gauge Set is a set of gauges, which are dials that help drivers monitor different systems. They’re typically located on the dashboard, where they’re easy to see. Gauge sets can vary in shape, color, and design, with some consisting of over two gauges per set. This typically includes the speedometer, oil pressure gauge, water temperature gauge, and fuel level gauge. Some sets also come with connectors for easy installation.
Gauge supply lines are hoses or tubes that are meant to transport fluids like water or oil to a sensor or gauge. Some gauge supply lines are made to transport oil for oil pressure gauges. These lines are made to withstand high temperatures and pressures. Hence, oil gauge supply lines are made from stainless steel. There are also gauge supply lines for water, air, or coolant, which can be made from nylon.
The Gauge Switch is a part that allows you to adjust a vehicle’s instrument gauge that has a remote memory plate. This part might be needed if the current or stock gauge switch has developed a problem that requires replacement, such as erratic operation. Gauge switches are connected to their respective gauge and play a role in accurate operation. Tachometers rely on their memory switch to change between standard operation, peak RPM display, and erase modes.
The Gauge Wire Harness is a bundle of power wires, sensor wires, or both that are specifically designed for your vehicle’s gauges. Gauge wiring harnesses handle the energy and information flow within the electrical system, allowing the gauges to work as intended. Wiring harnesses come in different lengths, but you can usually find universal ones that work for different types of gauges. Some are also color-coded and pre-terminated, making them easier to install.
The Gear Holder is a vehicle accessory that carries various items that would otherwise be scattered around the vehicle cabin. Large gear holders can be tied onto the roof of certain vehicles to create more space in the cabin. These types tend to be more complex, with hold-down straps and zipper openings. Smaller gear holders simply protect the things in the cabin from dust and minimal UV exposure. These holders can contain anything from bags to sunshades.
Gear Oil is a type of lubricant used on manual transmissions, differentials, transaxles, and transfer cases. Similar to engine oil, gear oil helps protect critical drivetrain components from premature wear and tear as well as extreme temperatures.
Compared to engine oil, gear oil has a higher viscosity. The two most common viscosity grades for gear oil are 75W-90 and 80W-90.
Rust prevention gear oils are typically mineral or petroleum-based, while extreme-pressure gear oils are often synthetic or mineral-based.
A Gear Position Gauge displays current gear data, allowing the driver to monitor the transmission.
The Gear Position Sensor is responsible for detecting the position of the gear and keeping the electronic control unit updated. This is done so that the transmission can make necessary adjustments to the engine’s rotational speed according to what gear the vehicle is in. For example, when a gear is shifted up, power and speed increase. This occurs because the transmission adjusts the engine’s rotating speed, increasing it so that it can keep up with the gear shift.
The Gear Puller is a tool that’s used to remove gears, pulleys, and collars from vehicle shafts. Normally, removing gears by hand requires a lot of effort. Gear pullers make the process easier by clamping on the components that need to be removed and pulling them out. This process is typically done when a vehicle needs to be inspected or repaired.
The Gear Shift Bushing, also known as a gear shifter bushing, is a type of bushing specifically designed to fit the end of the gear linkages, allowing your transmission to change gears better. Gear shift bushings can vary in size, shape, and color, but they’re typically made from durable plastic such as polyurethane. You can buy gear shift bushings individually, or you can purchase them in pairs or a kit.
The Gear Shift Lever is a metal lever attached to the transmission of an automobile. It’s used to switch gears while depressing the clutch pedal on manual transmission vehicles. Some other terms for the shift lever include the gearshift, the shifter, or the transmission lever. Automatic transmission vehicles have a similar lever known as the gear selector.
A Gear Shift Repair Kit contains parts that can fix a broken shift pivot connection at the transmission shift arm. A typical gear shift repair kit comes with a set of cable bushings.
Gear teeth are cogs inside a manual transmission’s input and output shafts. The gear teeth interlock with other gears of varying sizes and tooth counts. The ratio of teeth between two gears determines the gear’s speed and torque output.
The generator keeps the battery charged by generating electrical power from mechanical power via the principle of electromagnetic induction. It’s crucial to keep the battery fully charged during operation to keep the engine and electrical parts performing efficiently.
The Generator Bushing cushions some of the moving parts of an older vehicle’s generator, reducing friction and heat. This part might be needed if the current generator bushing has worn out or failed. The generator bushing is mounted in the generator, and it shares many of the roles of a bearing. The generator needs the generator bushing to operate smoothly.
The Generator Commutator End Bearing is a part that supports the rotor shaft and minimizes friction in charging systems that use a generator. This part might be needed if you have issues related to worn generator commutator end bearings, such as noise and reduced performance from the generator. You can find generator commutator end bearings in the generator, and they regularly switch the current direction to produce electricity. Older generator-based charging systems rely on the commutator end bearings to create DC voltage.
The Generator Pulley is a metal pulley component that links to a vehicle’s power generator. It transfers power from the generator to the rest of the vehicle’s electric systems, allowing them to function as the engine and the generator run. The generator pulley is a staple of classic Porsche vehicles. It’s sold in two parts and takes the form of metal discs with a rectangular hole in the center with curved ends.
Glass Cleaner is a special kind of spray that’s used to remove dirt, grime, grease, and other stains from glass surfaces without damaging them. They are commonly made of chemicals like ammonia and isopropanol as well as compounds like glycol ethers. After spraying a glass surface with a glass cleaner, cleanup is typically done with a squeegee or rubber foam since friction is required to remove tougher stains.
A Glass Run Channel is a rubber or plastic seal strip that runs around the window and serves to hold the window in place. It seals the window, keeping outside dust, debris, rain, and other weather hazards from entering the vehicle’s cabin. This keeps the vehicle’s driver and passengers dry and prevents the HVAC-controlled air in the cabin from escaping outside.
Glass channel shapes, lengths, and sizes vary depending on the vehicle. Glass run channels are also known as car window channels.
The Glove Box or glove compartment is a built-in storage area above the footwell of the passenger seat.
Everyday items are typically stored in the glove box, including manuals, maps, paperwork, and a flashlight, among others.
The glove box was originally a storage space for driving gloves, hence the name. This was during a time when vehicles didn’t have hard tops, causing the driver’s hands to feel numb and cold.
Glove box bumpers are the rubber stoppers underneath the glove box that prevent it from bottoming out and making a loud noise when opened. Over time, the adhesive that holds these rubber bumpers in place gets worn out and the bumpers get lost. Glove boxes won’t have a problem operating without a bumper. However, the glove’s contents can be thrown around if the door opens and bottoms out without the bumper, which can annoy vehicle owners.
The glove box door is a component of the glove compartment that serves as the storage space’s lid. This part might be needed if you want to replace your car’s current glove box door without replacing the glove box. Glove box doors are mounted on the front of glove boxes and usually have a physical lock and key. The glove box needs a door for aesthetic and security purposes.
The Glove Box Door Spring is the spring fixed between the notch of the glove box’s door and the body. Installed on one of the hinge screws, it pops the glove box open for easy access. In most vehicles, the glove box door has a small retainer button that keeps it closed, but the spring makes it easier for you to open the glove box. Some springs are sold in pairs.
The Glove Box Handle Cover conceals and protects the handle of the glove box from exposure and damage. This part might be needed if the current or stock glove box handle cover looks worse for wear or doesn’t work anymore. The glove box handle cover attaches to the glove box cover and covers the glove box handle. The glove box relies on the handle cover to help ensure you can open and close it.
The Glove Box Housing is the section of a vehicle’s body that holds the glove box. It mounts onto the front of the vehicle’s cabin, on the passenger side of the dashboard. The housing has a cutout for the glove box to fit into. It also has various other cutouts for the vehicle’s other essential components. The housing also protects various internal wires and components. Its exact design varies depending on the vehicle’s make and model.
The Glove Box Insert is a fully molded glove box that replaces a damaged or missing glove box. It’s typically made of durable plastic and can be easily installed by removing the front door latch and light. Because vehicles have glove boxes of different sizes, not all glove box inserts will fit your car. You’ll have to find one with the same dimensions as your glove box with proper relief cutouts for the latch.
Latches are door locks you can unlock from the outside. Glove box latches work the same, keeping your glove box secured. Glove boxes offer storage space for car owners, and many use them to keep vehicle registration papers and other important documents.
The glove box light connector is a short piece of wiring that connects the glove box light to a nearby wiring harness. Like many vehicle electrical connectors, the glove box light connector utilizes a male-to-female plug so that the glove box light can get power. Some vehicles have a female connector located near the glove box, allowing owners to install an aftermarket glove box light.
The Glove Box Lock is a security feature that prevents the glove box from suddenly opening. Most glove box lock assemblies have a latching mechanism that keeps the glove box door secured. Glove box locks are typically sold individually, so you’ll need to purchase separate hardware to install them in your vehicle. Most latches are made of durable metal, such as steel, and they can vary in size and shape.
The Glove Box Open Switch is an electronic switch that allows the driver or passenger to open the glove box on the vehicle’s passenger side. The switch location varies depending on the vehicle’s year, make, and model, but the switch is often found on the glove box itself for easy access. When pressed, it sends an electrical signal to the glove box latch to release, which in turn opens the glove box.
The glove box support is a part that helps hold the glove box in place. This part might be needed if the current or factory-issued supports show signs of fracturing. Glove box supports keep the glove box securely mounted in the dashboard. The glove box needs supports to prevent it from coming loose.
Work or safety gloves are necessary when you’re going to be working in a hazardous environment. The gloves are made to protect your hands from cuts, burns, and chemical exposure. If you’re a DIY mechanic, you might need gloves to protect your hands from hazardous substances and hot parts. After all, hands are a mechanic’s most important tool. Gloves can be made from a range of materials like polyurethane, knit fabric, spandex, and neoprene.
A Glow Plug is a heating element commonly found in diesel engines equipped with a precombustion chamber and some direct injection diesel engines. In newer vehicles, the powertrain control module turns on or pulses the glow plugs on and off depending on the coolant temperature and intake air temperature.
A glow plug uses 12 volts from the battery to start a cold engine and provides heat to help fuel ignite, which is especially useful when starting a vehicle in cold weather.
The Glow Plug Reamer is a small cutting tool used to enlarge, shape, and finish the bores of glow plugs. It’s typically used during glow plug replacement to help fit new glow plugs into the vehicle. Like other types of automotive reamers, glow plug reamers are operated by hand and come in a straight-fluted body with a tapered point. They can be purchased individually or as a set in different sizes.
The Glow Plug Remover Kit is a collection of tools that make removing a vehicle’s glow plug easier. The glow plug is a heating element found in each engine combustion chamber. It encourages more efficient fuel combustion by heating the air and fuel that enter the engine prior to combustion. Removing glow plugs can be difficult because it involves careful loosening and warming up.
A glow plug socket is a tool that’s designed to remove and replace glow plugs from diesel engines. Glow plug sockets have a joint that allows them to bend so they can be used to remove a glow plug even at difficult angles and tight spaces. Glow plugs can be difficult to remove since they’re located in a confined part of an engine. Glow plug sockets come in various sizes to accommodate different-sized glow plugs.
The glow plug wiring harness delivers power to the glow plugs that are in each of a diesel engine’s cylinders. The glow plug wiring harness is connected to the glow plug control module or relay, which is responsible for sending current that activates the glow plugs during the vehicle’s start process. A faulty glow plug wiring harness can prevent the glow plugs from functioning properly, which can make starting difficult.
The Gooseneck Hitch is a type of hitch that connects a gooseneck trailer to a truck bed hitch using a hitch ball. The main body of the hitch is typically found underneath the truck bed and is bolted onto the frame with brackets. This design helps distribute tow load evenly across the body of a truck.
A GPS Antenna receives and amplifies radio signals that come from satellites. The antenna converts these signals into electronic signals, which the GPS receivers use to calculate the vehicle’s position.
The GPS antenna needs at least three signals from different satellites for the system to provide an accurate location.
GPS antennas are usually located in the rear back glass or under the rear package shelf. Metalized window tints can weaken the GPS signal or even cause the system to malfunction.
A GPS (Global Positioning System) antenna is a device that receives radio signals from GPS satellites at varying frequencies. In the automotive context, it enables the vehicle’s navigation system to determine its precise location and direction.
A GPS Antenna Cover is a protective shell that’s engineered to shield the GPS antenna from dust and debris that can damage it. This protective cover is often a part of the overall design of the GPS in a vehicle, contributing to the antenna’s longevity and optimal performance.
The Grab Handle is a sturdy bar located above the car door’s interior that helps drivers and passengers enter and leave the vehicle. It also helps people maintain stability in case of abrupt movements.
Grease is a compound applied between components to lubricate moving surfaces or prevent rust. Grease is commonly applied on gears, bearings, joints, and other moving parts to prevent wear and increase a component’s lifespan. There are different kinds of automotive grease depending on the intended application. There is grease made to be applied on specific components like the engine and transmission. Compared to other lubricants like oil, grease can remain in equipment longer and can tolerate harsher conditions.
The grease fitting is a part that acts as a lubrication point for mechanical parts. It allows a grease gun to attach to the fitting so it can feed lubricant to the interior of mechanical systems. Grease fittings can be found on the housing of bearings and other parts that need regular lubrication. Older parts need grease fittings to receive the lubricant that they need.
A Grease Gun is a tool that shoots grease into hard-to-reach areas, typically in a vehicle’s suspension. This process lubricates the area. Grease guns have either a flexible hose or a fixed tube attached to the main cylindrical body. These guns can be powered by hand, by air, or by electricity. Grease in the barrel is pressurized this way and shot through the hose or tube. Various adapters can be fixed to the end of the hose or tube to suit different needs. Many grease guns have a handle for easier handling.
The Grease Hose is a flexible line specifically designed for grease guns. Grease hoses are typically made of durable thermoplastic elastomer with a layer of synthetic fiber to prevent leakage, kinks, and knots. They’re also resistant to high temperatures, oil, grease, and abrasion.
Attached to a grease gun, a grease hose allows you to conveniently apply lubricant to areas in your vehicle that are hard to reach. While most hoses have standardized fittings, they can still vary in length.
The grill stand is a part that provides structural support for the radiator grille. This part might be needed if the current or factory-issue grill stand has worn out or gotten damaged. Grill stands are connected to the vehicle’s radiator grill. The radiator grill relies on this part to help bear its weight and keep it stable.
The Grille Air Deflector helps improve a vehicle’s aerodynamics while keeping the engine cool. A well-designed air deflector stabilizes a vehicle’s nose, keeping it pointed toward the ground at high speeds.
The Grille Air Intake is where air enters the engine compartment to maintain the health and efficiency of your vehicle’s engine. Grille air intakes are designed to filter out debris and other contaminants to ensure optimal airflow. They can vary in design and shape, but they’re usually made of thick paper, cardboard, plastic, or aluminum mesh covers. Some are even designed to filter moisture from the engine, preventing blocked air filters, corrosion, and blown turbos.
The grille assembly refers to the section at the front of a vehicle’s bumper that houses the grille.
The grille is a protective yet ornamental grating. Many consider it to be a vehicle’s “face” due to its unique design and location between the headlights.
Grille assemblies shield the vehicle from debris on the road while simultaneously providing ventilation for components like the radiator, A/C condenser, and engine.
The Grille Bracket holds the grille assembly in place. It helps secure the grille, preventing debris from contaminating the hood and other critical engine parts.
The Grille Cover is an accessory that fits over a vehicle’s grilles. Some types of grille covers protect the grilles from ice buildup and other negative effects during winter months. These grille covers also prevent grit, dirt, and grime from entering the grilles and reaching the engine. Vanity grille covers are also widely available. These types of grille covers only alter the appearance of a vehicle’s grilles, giving the grilles a different silhouette and aesthetic.
The Grille Emblem Mount is an aftermarket accessory that can be installed on a vehicle’s grille. This lets you mount a custom emblem of your choosing, displaying it on your vehicle.
The Grille Guard is an aftermarket accessory that helps protect the grille from impact damage. It is a metal guard that goes in front of the grille, shielding it from rocks, branches, and other type of road debris. Many drivers also install grille guards because they change the silhouette of a vehicle and give it a more rugged, adventurous look.
A Grille Insert is a component that fits into a vehicle’s front grille for aesthetic enhancement, protection, customization, and functionality. Some grille inserts have adjustable louvers that let you control the airflow to the radiator.
Grille molding is a trim that surrounds the grille for added protection and detail.
A Grille Reinforcement protects your vehicle’s grille from impact damage during collisions or minor bumps.
The Grille Screen refers to the protective mesh that you can see integrated into your vehicle’s front grille. It prevents debris such as rocks, leaves, and insects from entering the engine bay and potentially damaging components like the radiator, condenser, or other vital parts. It also ensures that adequate airflow is maintained to cool the engine.
A Grille Shell is a component of the grille assembly that acts as a frame around the grille slats/grates.
The Grille Support reinforces the vehicle grille, helping it retain the latter’s shape in a collision.
A Grille Trim is a piece of trim between a vehicle’s headlights designed in a mesh pattern and sits in front of the engine bay. The grille allows air to flow through to keep the engine cool.
The Ground Strap protects a vehicle’s electrical components when power surges and short circuits occur. The strap itself is a grounding connection that runs from the engine to the negative battery terminal or the chassis. The strap protects vehicles by dispersing excess electricity that travels to and from its electrical components.
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.