Dealing with dings and dents is practically inevitable for any driver. Good thing there are ways to fix them. Aside from traditional methods, you can explore paintless dent removal or PDR, a fast and less complex method to repair minor imperfections on a vehicle.
PDR is a technique used to repair minor dents and dings. This method requires applying pressure behind the damaged area. Unlike traditional dent removal, there’s no need for bodywork and repainting. This makes this method less complicated and more affordable compared to traditional car dent repair.
To fix a dent, a professional will study its different angles and contours and map out the area. Afterward, they will apply pressure to restore the metal panel to its original shape.
This method requires specialized tools like dent removal rods and hammers. Professionals also use a combination of focused LED lights and overhead lighting to illuminate the work area. They also use a special reflector board to enhance the dent’s visibility.
To understand the difference between PDR and traditional dent repair, let’s discuss what typically happens during the latter.
The affected car panel will usually be removed using a specialized heat tool. After successfully restoring the metal to its original shape, the repaired area will be sanded down.
A polyester-based filler compound will then be used to fill in and smoothen out the surface of the dented area before any repainting is done.
The repaired panel will then be repainted to match the vehicle’s body. This step can be intricate because the precise color must be used to make sure the panel blends in with the rest of the vehicle’s exterior.
Overall, this method requires a lot of work, making it reasonable for professionals to charge more compared to PDR.
Because traditional dent removal can be expensive and time-consuming, it’s common for vehicle owners to opt for PDR when possible. However, you shouldn’t choose PDR just because it is cheaper.
You’ll have to assess the severity of your ride’s dents and dings. If they are just minor imperfections, then you shouldn’t have a problem with paintless dent repair.
Look for any signs of bubbling, chipping, or peeling near or within the dented area. These are signs that the area needs to be repainted If this is the case, you may have to go for traditional dent removal. PDR also won’t be possible if there’s too much stretching in the metal.
It’s natural for you to worry about someone else hammering and putting pressure on your already damaged car. But in cases like repairing dents, it’s better to let a professional handle it.
If you’re an experienced DIYer who wants to try this on your own, you can buy paintless dent removal kits to help you out.
A kit usually has all the tools you’re going to need to remove minor dents from your vehicle panels. A basic kit will have suction cups or dent pullers, repair rods, small tap hammers, and glue guns.
If you’re unsure about anything, it’s best to seek the advice of a trusted professional.
Roofs are also prone to dents caused by hail and other debris. Good thing most roof dents can be repaired with PDR.
If the roof damage is severe enough to cause paint damage or metal stretching, you have to go for traditional dent removal.
A typical paintless dent removal job will cost around $50 to $100. Meanwhile, a dent removal with a paint job can cost as much as $1000. Prices will vary depending on factors like the size of the dent, its location, the paint’s quality, and the type of vehicle that you own. You’ll also have to consider the labor rates in your area.
It’s natural to worry about your budget when it comes to vehicle repair. Here are some helpful tips to help you save money when on car dent repair:
Paintless dent repair is a great way to repair dents without reducing your car’s resale value. That’s because this method keeps your paint finish intact, preserving the car’s original appearance and the paint’s integrity.
Remember that even minor dents and dings can affect your car’s resale value. So it’s crucial to fix any dents before selling your vehicle.
If your vehicle’s body panels are severely damaged and can’t be restored using paintless dent removal methods, then you might need to replace the part completely. Finding the right body panel can be challenging since you need the specific body panel made for your vehicle’s specific year model. Luckily, CarParts.com allows you to search for compatible body parts with just a few clicks.
CarParts.com has a vehicle selector that can find compatible parts. Just enter your vehicle’s year, make and model and you’ll see a list of compatible parts. Our body panels like bumper covers, fenders, and door panels are made by leading aftermarket manufacturers. Rest assured that they’ll fit perfectly since they’re engineered to match the specifications of the original part.
Shopping for replacement body panels won’t cost you an arm and a leg here at CarParts.com. Check out our selection of bumper covers, fenders, and door panels, and shop for the part you need today!
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.