P069E Code: Fuel Pump Control Module Requested MIL Illumination

Reviewed by

Richard McCuistian, ASE Certified Master Automobile Technician

Technical Reviewer at CarParts.com

Written by CarParts.com Research Team - Updated on May 29th, 2024

Reading Time: 6 minutes
Summary
  • The P069E code is a seldomly used code that stands for “Fuel Pump Control Module (FPCM) Requested MIL Illumination,” meaning the FPCM has identified an issue in the fuel system.
  • Common causes for the P069E code include a faulty fuel pump, bad pressure sensors, or problems with the fuel pressure relays.
  • The symptoms that accompany the P069E code include an illuminated check engine light, hard or no-start conditions, and engine performance problems.

Aside from your vehicle’s main computer or powertrain control module (PCM), there are other modules in your vehicle that control specific components and functions. These modules use input from various sensors and coordinate with each other to control a variety of outputs.

The P069E code indicates that the module responsible for keeping the fuel pump working has encountered a problem. What does this code mean and are there indications that you’re dealing with this fuel pump-related issue? This guide will answer these questions and more.

What Does the P069E Code Mean?

Diagnostic trouble code (DTC) P069E stands for “Fuel Pump Control Module (FPCM) Requested MIL Illumination.” It indicates that the FPCM has identified an issue in the fuel system and is requesting the PCM turn on the check engine light. Note that most older systems (and even some newer ones) don’t use a FPCM – these simply use a relay, and there are different codes for relay failures than for FPCM failures.

Pro Tips are nuggets of information direct from ASE-certified automobile technicians working with CarParts.com, which may include unique, personal insights based on their years of experience working in the automotive industry. These can help you make more informed decisions about your car.

Pro Tip: It is important to note that almost no vehicle will store code P069E, even though most vehicles now use fuel pump control modules. This code is a very narrowly defined and very seldom used code most people will never see. However, some Chevrolet vehicles do use this code.

P069E code indicates that the FPCM has identified an issue in the fuel system and is requesting the PCM turn on the check engine light.

The FPCM supplies and regulates the voltage that goes to the fuel pump and the fuel pump relay. It can be a stand-alone module or a computer integrated into the PCM.

Usually, the FPCM is a stand alone module. Some fuel pump motors on late model vehicles are brushless three-phase DC motors that require a special module just for the pump to run. But fuel pump control modules tend to work under the command structure of the PCM to control fuel pressure being delivered from the in-tank pump in response to feedback from a pressure sensor. The more pressure that is required for the engine to do its work, the more current the FPCM is commanded to deliver to the pump. Typically, these modules don’t give much trouble.

Whenever the ignition is switched on and the PCM is activated, modules like the FPCM perform self-tests to ensure that they are working properly. The tests also allow the PCM to track the serial data that is transmitted over the data network.

The error code P069E is logged when the FPCM perceives problems with the fuel pump control system. The PCM illuminates the check engine light or the malfunction indicator lamp to indicate the issue.

What are the Possible Causes of the P069E Code?

There are several possible reasons why the FPCM might request the PCM to illuminate the check engine light. Most of them are connected to issues that concern the components and the circuitry of the fuel pump. Here are some of the possible causes of the P069E trouble code:

  • Faulty fuel pump
  • Faulty fuel pressure sensor
  • Bad fuel pressure relay
  • Wiring problems
  • Problem with FPCM or PCM
One possible cause of the P069E code is faulty wiring.

What are the Common Symptoms of the P069E Code?

Your vehicle has ways of telling you that there’s something wrong with its parts other than illuminating the check engine light. As a DIYer, it’s best to familiarize yourself with the common symptoms of the error code P069E should you ever encounter it. They include the following:

  • Check engine light is illuminated
  • Hard start or no start condition, depending on the root cause of the issue
  • Engine performance problems, such as delayed starting, power loss, drivability issues, and increased fuel consumption
  • Engine idling speed fluctuates
  • Other trouble codes

In some cases, there are no obvious symptoms save for a stored P069E code and an illuminated check engine light.

How to Diagnose the P069E Code

There are a handful of possible solutions to most OBD-II codes because they have several probable causes. The important thing about fixing an error code like the P069E is determining its exact root issue through rigorous troubleshooting.

Although it sounds intimidating, diagnosing and repairing OBD-II codes is possible with the help of resources like repair guides. Getting advice from your local mechanic is also helpful if you’re new to DIY repairs.

If you’re looking to expand your knowledge on the error code P069E, below are some helpful video resources that will give you an idea of what the troubleshooting process might involve:

How to Fix the P069E Code

As mentioned above, there are a lot of possible repair solutions for OBD-II codes. The P069E code is not an exception. Its repair depends not only on the root cause but also on the vehicle’s make and model.

Whether you’re a seasoned or a new DIYer, it’s important to get accurate repair information from credible sources. A repair guide or a subscription would be helpful if you plan on making repairs on your own. However, if you’re unsure about your skills in repairing the P069E code, you can go to your local mechanic to have the issue fixed.

Other Notes About P069E

Older fuel injection systems manage excess fuel pressure by returning fuel to the tank. Meanwhile, returnless systems typically use a stand-alone fuel control module to modulate the pump’s speed to control fuel pressure.

Returnless systems have an advantage over the older systems in terms of the reduction of evaporative emissions because the fuel is subject to less agitation and heating. The P069E code affects these electronic returnless fuel systems in that most of the root issues are more likely to affect emissions.

In any case, codes related to the fuel pump control module, like the engine code P069E, should always be addressed immediately. They can cause a number of drivability issues as well as a no-start condition if left unresolved.

Where To Get Parts To Resolve the  P069E Code

If your fuel pump, fuel pump relay, or pressure sensors are triggering the P069E code, you’ll likely need to replace them. Otherwise, you might experience engine performance problems or difficulty starting your vehicle. Resolving DTC P0327 as soon as possible is ultimately in your best interest. Thankfully, you can easily purchase any new parts you need at CarParts.com.

The CarParts.com website is perfect for ordering your parts from the comfort of home. With parts at different price points to match your budget and a built-in vehicle selector for that guaranteed fit, finding the right part just got that much easier. It takes just a few easy clicks to proceed through the safe and secure checkout. So browse the wide range of aftermarket brands to your heart’s content.

We’ve got your back if you need a new fuel pump or a different component to solve DTC P0327, so order now at CarParts.com.

Products Mentioned in this Guide

Shop this Project

DriveMotive – Fuel Pump, With Fuel Sending Unit
$86.99 Price and rating may change from the time content is published.
Replacement – Fuel Pressure Sensor – Direct Fit, Sold individually
$19.49 Price and rating may change from the time content is published.
Bosch® – 0986AH0113 Fuel Pump Relay – Sold individually
$3.99 Price and rating may change from the time content is published.
About The Authors
Reviewed By Richard McCuistian, ASE Certified Master Automobile Technician

Technical Reviewer at CarParts.com

Richard McCuistian has worked for nearly 50 years in the automotive field as a professional technician, an instructor, and a freelance automotive writer for Motor Age, ACtion magazine, Power Stroke Registry, and others. Richard is ASE certified for more than 30 years in 10 categories, including L1 Advanced Engine Performance and Light Vehicle Diesel.

Written By CarParts.com Research Team

Automotive and Tech Writers

The CarParts.com Research Team is composed of experienced automotive and tech writers working with (ASE)-certified automobile technicians and automotive journalists to bring up-to-date, helpful information to car owners in the US. Guided by CarParts.com's thorough editorial process, our team strives to produce guides and resources DIYers and casual car owners can trust.

Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.

View Comments

  • Hey Buddy, great video's on the P069E error code. I'm experiencing the exact same thing on my 2008 Silverado along with code P069E and P0191. The only difference is I just put in a new aftermarket fuel pump because the original rusted out and was leaking gas. We didn't have these codes before installing the new fuel pump, only after the new pump was installed. Do I need to get my FPCM reprogrammed to clear these codes since it's not a genuine chevy fuel pump made for my truck?

    • Hello,

      You shouldn't need to reprogram the FPCM after replacing the fuel pump. If the code wasn't there beforehand, chances are, either the replacement fuel pump didn't get installed properly, or it's defective.

  • My stepdaughter chevy cruze is throwing this code. Any clue as to what it could be on this model 2014 Ltd 1.4

  • I replaced the fuel pump also recently took to a shop to replace the fuel module and to program it and now it starts again but it still has the check engine light with the P069e code what can be causing the check engine to stay on?

  • I have a Camaro v6 2010 the fuel pump was replaced with aftermarket one a now I have the p069e I need to reprogram de fuel control module?

Share
Published by
CarParts.com Research Team and Richard McCuistian, ASE Certified Master Automobile Technician