Automotive technology has advanced significantly over the years. Two notable advancements are the incorporation of variable valve timing (VVT) and variable valve lift (VVL) systems in modern internal combustion engines.
Just like other parts of your engine, the components of a VVT or VVL system may fail over time. Code P0026 is one of several diagnostic trouble codes that may indicate a problem in the operation of these systems.
Diagnostic trouble code (DTC) P0026 stands for “Intake Valve Control Solenoid Circuit Range/ Performance (Bank 1). It is set when the powertrain control module (PCM) detects that the actual camshaft position does not match the desired camshaft position. This problem may be due to an issue with the operation of the VVT solenoid. Code P0026 may be triggered in vehicles equipped with a VVT and/or VVL system.
There’s a two-wire solenoid the ECM/PCM uses to control the oil pressure delivered to the cam timing device on each head if the vehicle is a V6 or even if it’s a four cylinder with 2 camshafts. It’s easy for the ECM/PCM to keep track of this circuit.
A “performance” code can mean that there is no problem with the circuit, but that the ECM/PCM sent a command and determined that the command either didn’t happen or didn’t happen quickly enough, which would be a mechanical issue or possibly sludge-clogging of the solenoid or passages.
Code P0026 may also be set in vehicles with VVL systems when the PCM perceives that the VVL oil pressure switch has been either “on” or “off” for too long.
Bank 1 refers to the side of the engine where cylinder #1 is located. In most vehicles, the intake valve control solenoid is usually found on the intake manifold side of the cylinder head. To understand this code better, let’s discuss how VVT and VVL systems work.
If you’re interested in a DIY fix for P0026, you should read our advanced technical discussion about camshaft angle and VVT.
A VVT system adjusts the timing of the opening and closing of the intake and/or exhaust valves to improve fuel consumption and/or engine performance. It uses actuator(s) that are usually mounted on the end of the camshaft(s).
The vehicle’s primary computer sends a signal to the VVT solenoid (s) to apply pressure to the actuator(s) to change the position or angle of their corresponding camshaft. This process alters the valve timing as required.
A VVL system allows the PCM to vary the distance that the valves can be lifted from their seats to enhance engine performance. It uses a camshaft with different profiles for low-speed and high-speed operation.
A typical VVL system has three rocker arms operating two intake valves. When conditions are correct, the PCM commands an oil control solenoid to apply oil pressure to drive a pin that locks the rockers together. This forces the valves to follow the cam profile designed for high-speed operation. The VVL diagnosis switch lets the PCM know when oil pressure has been applied to the system.
Note: The definition of code P0026 may be different depending on the vehicle manufacturer. Consult the appropriate repair manual or repair database for the exact code definition.
Diagnosing the underlying cause of the P0026 code can be tricky. Without the proper tools and know-how, it may be difficult to pinpoint which component is causing the problem. If you are not well-versed in auto repair, it is best to take your car to an auto shop for proper diagnosis.
Here is a video that may give you a better idea of what the diagnostic process for this code might involve:
There is no universal fix for this code. The diagnostic and repair strategies for this DTC will vary depending on the make and model of the vehicle. For example, the known fixes for a code P0026 in a Volvo may not be helpful in troubleshooting a Subaru P0026 code.
If you are an advanced DIYer who’d like to try and fix this code yourself, you may consult a repair manual for vehicle-specific information. You may also get factory repair information from an online repair database.
Don’t let a damaged intake valve control solenoid prevent your vehicle from delivering its best performance. Rediscover your vehicle’s power when you shop for a top-notch intake valve control solenoid replacement here at CarParts.com.
Our direct-fit intake valve control solenoids were handpicked by top automotive professionals, so you’re sure to get a replacement that’s built to last. Our products also come with a low-price guarantee, helping you get the best value for your money.
Order now, and we’ll deliver the part you need straight to your doorstep in as fast as two business days. Enter your vehicle’s year, make, and model into our website’s vehicle selector to start browsing, and use the search filters to narrow down the catalog to your preferred brand, price range, and more.
You can also call us using our toll-free hotline to place your order, and our round-the-clock customer service representatives will be ready to assist you.
Get your vehicle running like it’s good as new when you buy an intake valve control solenoid from CarParts.com today!
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.