Mounted to the steering column behind the ignition cylinder is the ignition switch. This part is responsible for activating nearly all of the electrical systems onboard your vehicle. When the switch fails, you’ll notice one or more problems that you’ll want to address right away.
Ignition switch problems can range from flickering interior lights to something more severe, such as a no-start condition from your vehicle. If you notice one or more of the symptoms below, it may be time to have your ignition switch checked by a professional.
A bad ignition switch won’t be able to supply power to the starter motor, ignition system, and other engine controls, preventing the engine from starting. Keep in mind, however, that engine issues may also be caused by other electrical and mechanical problems, such as a dead battery or a faulty starter solenoid. To be sure, it’s best to consult a certified mechanic for an accurate diagnosis.
In some cases, a faulty ignition switch will still allow your vehicle to start. However, the switch may only provide momentary power to the fuel pump and ignition system, eventually causing your vehicle to stall.
Ignition switch issues may also prevent you from restarting your vehicle due to worn-out ignition contacts, which have become more sensitive to heat and vibration.
A defective ignition switch may cause your vehicle’s interior lights, dashboard lights, and other accessories to turn off momentarily.
A silent starter motor can indicate a bad ignition switch, but if you experience that, put the transmission in neutral and try again to see if there’s a problem with the neutral safety switch. However, if you hear any clicking sounds from the motor, you may be dealing with something other than an ignition switch problem.
A stuck key is another symptom of a defective ignition switch, which may leave the engine running even after it is removed. Usually, though, this kind of issue is more related to the ignition lock cylinder than the electrical part of the switch.
Your vehicle’s ignition switch has four positions that activate different systems:
The lock/off position cuts off power from all circuits and locks the steering wheel. For automatic transmission vehicles, this position also locks the transmission gear.
This position activates accessories, such as the radio, dashboard lights, and center console.
The ignition switch’s third position powers the vehicle’s engine controls and other circuits except for the starter motor.
The start position activates the starter motor and engine controls and allows the driver to crank the engine.
There are several reasons why your vehicle’s ignition switch may fail. Some of these include broken springs, worn ignition switch contacts, and temperature problems, which may prevent you from even getting your vehicle out of the garage. But if you do manage to get your engine running while having a defective ignition switch, it’ll most likely shut off while you’re driving.
A thorough diagnosis must be made to ensure that your vehicle is in need of an ignition switch replacement. An ignition switch replacement can cost you anywhere between $20 and $90 on parts and another $60 to $100 on labor. Costs may vary depending on your specific vehicle model as well as your location.
Keep in mind that installing a new ignition switch may require you to disable the steering column, which may deploy the vehicle’s airbags if done incorrectly. Some vehicles also require removing the air conditioning ducts.
To be safe, have a certified mechanic do it instead. Failure to replace a faulty ignition switch may leave you stranded in the middle of the road or cause your ride to stall in traffic, which is dangerous not only for you but for other drivers as well.
The ignition key cylinder is connected to the ignition switch, which may be part of the key lock cylinder, but more often is mounted away from it and is operated by mechanical linkage. Some switches are mounted in line with the lock cylinder so that as the cylinder is turned, the switch rotates on the same axis.
Older Fords have a steel rod leading from the lock cylinder down to the switch where it’s mounted on the column. Some have plastic gears driving links that slide through channels in the steering column to operate the actual electric part of the switch, which is responsible for activating nearly all of the electrical systems onboard your vehicle. In extreme cases, the ignition switch, if it fails in certain ways, can set fire to the vehicle.
More modern ignition switches tend to activate electronic modules, which in turn use relays to carry the heavy current that once traveled through the ignition switch (see 2019 Toyota schematic shown).
There’s no such thing as a fun car ride when there’s a faulty ignition switch getting in the way of your daily activities. Instead of enjoying a much-needed road trip, you’ll be stuck in your home while your vehicle gathers dust in the garage until you get a new ignition switch.
This is the kind of problem CarParts.com can help you solve. Our website offers top-notch ignition switches that come as direct-fit replacements for a wide range of makes and models 一 including yours!
Placing your order is as easy as tapping a few tabs in a matter of minutes. Enter your ride’s specifications into our vehicle selector to narrow down the search results to compatible ignition switches. You can also use the search filters to find an ignition switch according to your preferred brand, price range, and more.
All our products come with a low-price guarantee, so you don’t have to worry about going over budget for your repairs. Shop now, and we’ll deliver the part you need straight to your doorstep in as fast as two business days.
Take advantage of our unbeatable deals, and shop now!
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.
View Comments
I have a 2012 Nissan Altima with the dash mounted( ignition that's a key fob) that I think is faulty and reading that key is still in, draining the battery. Is that possible? That's the only thing left I can think of!