Watch this video to learn how to replace the tail light bulbs on a 2009-2014 Ford F-150.
Ready to perform this DIY replacement job? Remember that all the parts in this guide can be found on CarParts.com. Check out all the products that fit your vehicle right here.
There are no tightening torques for this operation.
Here’s the toolbox we recommend to repair your Ford F-150 : HM85 85 Piece Ratchet and Socket Set
List of tools:
Step 1: Turn off your engine and engage the parking brake.
Step 2: Open the car’s tailgate to access the rear light housing.
Step 3: Remove the tailgate assembly by unscrewing the two screws using an eight-millimeter socket.
Step 4: Pull the assembly towards the rear to disengage the locator pins.
Step 5: Take out the brake tail light bulb socket by turning it counter-clockwise and pulling it out.
Step 6: Repeat the process for the turn signal and reverse light bulbs.
Step 7: To reassemble, follow the same steps in reverse order.
Step 8: Ensure not to touch the glass of the bulbs with your fingers; clean them using paper towels if necessary.
Step 9: Place the sockets into the tail light housing and lock them by turning clockwise.
The operation and tools displayed in the video should be available on the following vehicles :
Never touch the lightbulbs with your bare fingers.
Why is it important not to touch the lightbulbs with your fingers? When you touch something with your fingers, you unwillingly deposit a thin layer of grease and dust on the object. When the bulb is lit, the glass becomes extremely hot. This thin layer of dust and grease is prone to storing more heat at this very spot, thereby weakening the glass and ultimately making it explode.
Always ensure the lightbulbs are correctly placed (flat position).
Disclaimer:
This video is for entertainment purposes only. CarParts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.