How to Replace Tail light Assembly: 2009-2018 Dodge RAM 1500

Written by

CarParts.com Videos

carpartsvideos

Updated on June 18th, 2024

Reading Time: 2 minutes

Watch this video to learn how to replace the tail light assembly on a 2009-2018 Dodge RAM 1500.

Replacing Tail Light Assembly on a 2009-2018 Dodge RAM 1500: What You Need

Ready to perform this DIY replacement job? Remember that all the parts in this guide can be found on CarParts.com. Check out all the products that fit your vehicle right here.

Parts Checklist

Tightening Torques

No tightening torques for this operation

Tools Checklist

Here’s the toolbox we recommend to repair your Dodge RAM 1500: HM85 85 Piece Ratchet and Socket Set

List of tools:

  • Ratchet
  • T25 Torx socket

Step-by-Step Instructions

Step 1: Turn off your engine and set the parking brake.

Step 2: Open the tailgate of your vehicle.

Step 3: Using a ratchet and a T25 Torx socket, remove the two screws attaching the taillight assembly to the vehicle body.

Step 4: Gently pull back on the light assembly to release it from the retainers at the outside edge.

Step 5: Disconnect the electrical connectors from the taillight assembly by pulling on the tab and then on the connector.

Step 6: Once the connectors are detached, remove the old tail light assembly.

Step 7: Take the new tail light, ensuring that all bulbs are supplied with it.

Step 8: Reconnect the electrical connectors to the new tail light assembly.

Step 9: Position the new light back into the body, securing it with the retainers.

Step 10: Screw in the two holding screws to firmly attach the taillight assembly to the vehicle body.

Step 11: Operation complete.

Compatible Vehicles

The operation and tools displayed in the video should be available on the following vehicles:

Important Reminder

The light is held in the body by retainers.

Disclaimer:

This video is for entertainment purposes only. CarParts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.