Watch this video to learn how to replace the ignition coils on a 2009-2018 Dodge RAM 1500.
Ready to perform this DIY replacement job? Remember that all the parts in this guide can be found on CarParts.com. Check out all the products that fit your vehicle right here.
Here’s the toolbox we recommend to repair your Dodge RAM 1500: HM85 85 Piece Ratchet and Socket Set
List of tools:
Step 1: Turn off your vehicle’s ignition and set the parking brake.
Step 2: Pull the hood release handle and open the hood.
Step 3: Locate the ignition coils; there are 3 on the passenger side under the air duct and 3 under the intake manifold.
Step 4: To access the passenger side coils, unscrew the two holding clamps on either side of the duct using a flat head screwdriver.
Step 5: Remove the hose connected to the coils.
Step 6: Disconnect the power from the ignition coil by pushing on the tab and pulling on the connector.
Step 7: Use a ratchet, extender, and a 10 mm socket to remove the bolt holding the coil.
Step 8: Carefully remove the coil with small lateral back and forward movements.
Tip: Use a thin plastic tube taped to the end of a vacuum to clean around the spark plug, preventing dirt from falling into the motor.
Step 9: Put the coil back, pushing it in as far as possible.
Step 10: Screw the bolt back in using a ratchet.
Step 11: Finish tightening the bolt using a torque wrench.
Step 12: Reconnect the ignition coil and lock it.
Step 13: Repeat the process for the other ignition coils.
Step 14: Replace the air intake hose.
Step 15: Screw the two clamps back on.
Step 16: Operation complete.
The operation and tools displayed in the video should be available on the following vehicles:
Be careful as these coils are fragile. Handle it with care.
Disclaimer:
This video is for entertainment purposes only. CarParts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.