Running your vehicle on a mixture of different fuels, such as gasoline and diesel, can cause many problems. Fortunately, there isn’t much to worry about if you accidentally put ethanol gas into your gasoline car when there’s still non-ethanol gas in its tank–unless you put a lot of E85 in your tank and your vehicle isn’t flex fuel.
Alcohol doesn’t have the same energy density as gasoline and a non-flex fuel vehicle won’t run right if you fill up with E85.
Most modern gasoline engines can burn gas blends that contain up to 15% ethanol without problems. If you drive a flex-fuel vehicle, it can handle up to 85% ethanol-blended gas. And given the benefits of ethanol gas, you might even get more mileage compared to running on non-ethanol-blended gas.
While your car can handle the occasional mistake, avoid mixing ethanol and non-ethanol gas. Stick to the manufacturer-recommended fuel blend that the engine can burn well.
Ethanol-blended gas is gasoline with the addition of ethanol. Also called ethyl alcohol or grain alcohol, ethanol is responsible for the intoxicating effect of alcoholic beverages.
Ethanol is a renewable biofuel made from biomass, such as corn grain. It can be used as a fuel by itself, but often serves as an additive for gasoline.
Compared to gasoline, ethanol stores less energy. You’ll need to consume more ethanol to match the energy output produced by burning gasoline.
However, ethanol has a higher octane number than gasoline. It requires higher pressures before it can combust, so it’s less likely to vaporize or burn outside the pressurized confines of the engine’s cylinders.
Ethanol-blended gas improves the stability of pure gasoline by increasing its octane number. The lowest octane rating for fuel is 87, and non-ethanol gas has difficulty achieving this rating. Adding ethanol raises the octane rating of the resulting fuel blend. It also prevents knocking, the uneven combustion of gasoline that makes a distinctly loud sound and can damage the engine.
Furthermore, ethanol improves the oxygen content of gasoline. More oxygen increases the engine’s efficiency at burning the air-fuel mixture. Ethanol also lowers your vehicle’s emissions by reducing unburned and incompletely burned gas.
There are several ethanol gas blends available. E10 is the most common blend and has an ethanol content of 10%. If you accidentally put ethanol-blended gas in your car, it’s likely E10, which minimizes risk to your engine.
Another available blend is E15, which has an ethanol content ranging from 10.5% to 15%. It’s compatible with light-duty vehicles made in 2001 and above. Newer flexible fuel vehicles (FFVs) can also burn E15 fuel.
Then there’s the E85 ethanol gas blend. Also called flexible fuel or flex fuel, it can contain up to 83% ethanol. Most gas cars can’t run properly on E85 because it generates less energy than lighter ethanol-blended fuels. FFVs are the only ones that can safely use this type of fuel.
A functioning flex fuel sensor ensures your vehicle can accurately detect the ethanol content in the gasoline. Take that away, and there’s a higher risk of accidentally adding fuel with too much ethanol in your gas tank. Engine knocking and uneven fuel combustion can occur, leading to some costly engine damage. Luckily, you can prevent all this from happening by getting a brand-new flex fuel sensor from CarParts.com today.
CarParts.com offers a wide selection of flex fuel sensors sourced from only the most trusted manufacturers in the industry. To easily browse through our catalog, be sure to use our vehicle selector and search filters to see which parts are available and compatible with your ride. You’re probably itching to get back on the road, so you’ll be pleased to know that CarParts.com also guarantees fast shipping. Order by 12 p.m. ET, and you can expect your new flex fuel sensor to arrive in as fast as two business days.
Don’t wait until your flex fuel sensor completely breaks before replacing it. Check out our selection of flex fuel sensors at CarParts.com today!
Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.