Answer
Aug 29, 2024 - 01:30 AM
Hello there!
If your key fob has been submerged in water, it's possible that the internal electronics have been damaged. Here are a few steps you can try:
1.) Dry the Fob: First, dry the key fob as thoroughly as possible. If you can, remove the battery from the fob to help it dry out faster. Use a soft cloth to wipe it down and leave it in a dry, warm place for several hours. You can also try placing it in a bag of uncooked rice or silica gel packets to help absorb moisture.
2.) Try a Spare Key: If you have a spare key fob, try using it to start your car. If it works, then the wet fob may need replacement or further drying.
3.) Manual Key Use: If your car allows it, try starting it with the physical key rather than the fob. Some vehicles have a slot for the key fob in the ignition that may still recognize it even if the fob's battery is dead,
4.) Fob Reprogramming: If drying out the fob doesn't work, you might need to reprogram it. This usually requires a visit to the dealership or a locksmith with the right equipment.
If none of these work, the fob may be damaged beyond repair, and you'll likely need a replacement...
If you need to replace the key fob, click this link to be directed to our website and enter the vehicle information, followed by the part name. Our system will display available parts for your vehicle. Our system will display available parts for your vehicle.
Good luck!
If your key fob has been submerged in water, it's possible that the internal electronics have been damaged. Here are a few steps you can try:
1.) Dry the Fob: First, dry the key fob as thoroughly as possible. If you can, remove the battery from the fob to help it dry out faster. Use a soft cloth to wipe it down and leave it in a dry, warm place for several hours. You can also try placing it in a bag of uncooked rice or silica gel packets to help absorb moisture.
2.) Try a Spare Key: If you have a spare key fob, try using it to start your car. If it works, then the wet fob may need replacement or further drying.
3.) Manual Key Use: If your car allows it, try starting it with the physical key rather than the fob. Some vehicles have a slot for the key fob in the ignition that may still recognize it even if the fob's battery is dead,
4.) Fob Reprogramming: If drying out the fob doesn't work, you might need to reprogram it. This usually requires a visit to the dealership or a locksmith with the right equipment.
If none of these work, the fob may be damaged beyond repair, and you'll likely need a replacement...
If you need to replace the key fob, click this link to be directed to our website and enter the vehicle information, followed by the part name. Our system will display available parts for your vehicle. Our system will display available parts for your vehicle.
Good luck!
Add New Comment