Answer
Jul 09, 2024 - 10:46 PM
Hello there, Lauras!
To clear the "air suspension needs servicing" alert on your 2014 Dodge Ram Sport after swapping to a normal suspension, you’ll need to trick the vehicle's computer into thinking the air suspension system is still functioning. Here’s a straightforward way to do that:
1.) To clear the warning message, you'll need to disconnect the battery for a few minutes to reset the module. This will erase any stored codes related to the air suspension.
2.) Use a Diagnostic Tool: Get an OBD-II scanner with advanced features, like the ones used by mechanics. Plug it into your truck's diagnostic port and access the suspension settings.
3.) Modify Settings: Look for options to disable the air suspension system in the truck’s settings. Some scanners have the ability to turn off specific modules, including the air suspension.
4.) Install Bypass Resistors: If the diagnostic tool route doesn’t work, you might need to install resistors in place of the air suspension sensors. This sends a signal to the computer that the system is still active and functioning normally.
5.) Reflash the ECU: In some cases, you may need to have the ECU reflashed or reprogrammed by a dealership or a professional tuner to remove the air suspension settings entirely from the system’s memory.
Choosing any of these methods should help you get rid of that pesky alert. If you're unsure about doing it yourself, a visit to a professional mechanic or an auto electrician can ensure it’s done right.
Good luck and have a good one!
To clear the "air suspension needs servicing" alert on your 2014 Dodge Ram Sport after swapping to a normal suspension, you’ll need to trick the vehicle's computer into thinking the air suspension system is still functioning. Here’s a straightforward way to do that:
1.) To clear the warning message, you'll need to disconnect the battery for a few minutes to reset the module. This will erase any stored codes related to the air suspension.
2.) Use a Diagnostic Tool: Get an OBD-II scanner with advanced features, like the ones used by mechanics. Plug it into your truck's diagnostic port and access the suspension settings.
3.) Modify Settings: Look for options to disable the air suspension system in the truck’s settings. Some scanners have the ability to turn off specific modules, including the air suspension.
4.) Install Bypass Resistors: If the diagnostic tool route doesn’t work, you might need to install resistors in place of the air suspension sensors. This sends a signal to the computer that the system is still active and functioning normally.
5.) Reflash the ECU: In some cases, you may need to have the ECU reflashed or reprogrammed by a dealership or a professional tuner to remove the air suspension settings entirely from the system’s memory.
Choosing any of these methods should help you get rid of that pesky alert. If you're unsure about doing it yourself, a visit to a professional mechanic or an auto electrician can ensure it’s done right.
Good luck and have a good one!
Add New Comment