Answers
Mar 18, 2023 - 11:37 AM
With the year you said it was a 2015. The computer only resets after 20 mph. I try to get them to 50mph and drive it about 1 mile, then recheck the code.
Mar 20, 2023 - 07:22 PM
Hi there.
The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. You can learn more about it here.
Some error codes may not be immediately detected by the ECM until certain driving conditions are met. This is because the ECM needs to receive input from various sensors to confirm the error. Driving the car for a short distance at different speeds can help trigger these sensors and prompt the ECM to detect the error code. However, this does not necessarily mean that the error has been resolved.
If you have access to a scan tool, We would recommend using it to clear the error code and see if it reappears. If it does, you may need to have the HO2S circuit checked by a qualified mechanic to determine the cause of the malfunction (First link provided above).
Click this link for the part we recommend for your vehicle to be replaced.
We hope this helps. Have a nice day!
The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. You can learn more about it here.
Some error codes may not be immediately detected by the ECM until certain driving conditions are met. This is because the ECM needs to receive input from various sensors to confirm the error. Driving the car for a short distance at different speeds can help trigger these sensors and prompt the ECM to detect the error code. However, this does not necessarily mean that the error has been resolved.
If you have access to a scan tool, We would recommend using it to clear the error code and see if it reappears. If it does, you may need to have the HO2S circuit checked by a qualified mechanic to determine the cause of the malfunction (First link provided above).
Click this link for the part we recommend for your vehicle to be replaced.
We hope this helps. Have a nice day!
Mar 30, 2023 - 09:50 AM
you could be chasing your tail on this one before you replace anything else check your fuel pressure low pressure will throw all kinds of emission codes
Add New Comment